Supervisor or Owner opens Stations and printers to see which stations are in use. A station reads as Quiet when nobody has scanned or worked at it for the site's quiet period. Quiet is not a fault: outside working hours every station is quiet.
Read the station's line
Each line shows the station's last activity and the roles of the person who worked there, never a name. Activity is a scan or other work on the station page; a station left open on a screen with nobody using it does not count. A station nobody has ever worked at reads as quiet from the start.
Attention needed outranks quiet: a quiet station whose printer has stopped, or whose hold has waited too long, shows attention with every reason.
The station's browser
If the bench should be working, go to it. Check its browser has ParcelOffice's station page open and signed in. A station locks after a spell with no activity and asks the person to sign in again; until someone does, it stays quiet. The station's line reads working again as soon as someone works there. If the station's device lost its connection, see when the network drops.
Holds waiting at a station
A despatch held by the rules waits for a supervisor. Supervisors see the site's open holds under the list, each with the station that raised it. A station whose hold has waited half an hour needs attention. Except the hold, or put its data right, in Shipments; see decision modes. The Owner sees how many despatches are held, not the despatches.
Owner: set the quiet period
On Stations and printers, the Owner chooses how long a station may go without activity before it reads as quiet: 15 or 30 minutes, or 1, 2, 4 or 8 hours. It is one period for the whole site, 30 minutes until the Owner chooses. Choose one longer than the quietest normal gap in a shift.