Skip to content
SmartFACT HelpHandbooksWatch and practise
Handbooks: ParcelOffice

Set up benches and their settings

Group a site's stations into benches, move stations between them, and set each bench's decision mode, one-scan booking, Automatic, presets and orders.

Review edition · 17 November 2026 · For Owner, Reviewer, Supervisor, Operator

On this page

A bench is a named group of a site's stations with its own decision settings: Guided, Assisted or neither, one-scan booking and whether Automatic is allowed; which presets its stations offer; and, if you choose, which orders it takes. Every station is in exactly one bench. A site starts with one bench, called Main, and while it has only one, every station works as the site always has. The order source, carrier account, presets and rules, people and plan stay the site's, shared by every bench.

Benches are on Site settings. An Owner adds, renames and removes benches and moves stations. A Reviewer changes each bench's decision settings, presets and orders. Every change needs recent confirmation, and each bench shows when its settings last changed and by whom.

Add, rename and remove a bench

Owner: under Benches, enter New bench name and choose Add bench. The page says "Bench added. Move stations to it, then a reviewer sets its decision settings, presets and orders." A new bench starts with every setting off, every preset of the active release, no order filter and Automatic not allowed.

To rename one, change its Name and choose Rename. Names are up to 64 characters, and two benches at a site cannot share a name, whatever their capitals.

Remove bench is offered for every bench but the default one, once it has no stations and no order filter. A removed bench keeps its history. The refusals say what to do first:

  • "Not done: move its stations to another bench first."
  • "Not done: a reviewer clears its orders first, so removing it never changes which orders another bench takes."
  • "Not done: the default bench cannot be removed. A new station starts there; rename it if you wish."

Move a station

Owner: in the table of stations, choose the station's new bench and Move. The page says "Station moved. Its next order follows the new bench; any Automatic arm and enablement there ended." An order loaded at the station is cleared, so its next order is decided under the new bench. A Reviewer enables Automatic for it again on Automatic if the new bench allows it.

A newly enrolled station starts in the default bench. Enrol and pair stations on Team & stations: see prepare local people and pair the actual station.

Set a bench's decision settings

Reviewer, in the bench's panel:

  • Decision mode: Turn Guided on or Turn Assisted on, and off again. A bench uses one decision mode at a time, so turn one off before the other. Its stations change from their next order. See decision modes.
  • One-scan booking: Turn one-scan booking on or off. It applies only while the bench presents Manual, and each Operator at the bench confirms what it means before their scans change. See station booking.
  • Automatic: Allow Automatic here lets a Reviewer enable the bench's stations on the Automatic page; it enables nothing by itself. Stop Automatic here disarms every station at the bench and ends its enablement: "Automatic is stopped at this bench. Its stations are disarmed and no longer enabled." See Automatic.
  • Wired bookings: Turn Wired bookings on or off, with recent confirmation. It is off for every bench until a Reviewer turns it on. While it is on, a live wiring that names one of the bench's stations books there when StoresFlow says a pick is finished; while it is off, those bookings wait for a Supervisor. See wirings.

Choose a bench's presets

Reviewer: under Presets, choose Every preset of the active release or Only these presets and tick them, then Save presets. Its stations show them from their next order. A bench can list up to 100 presets, each from the active release.

When a release no longer has any preset a bench lists, its stations offer none, and Health warns "Benches with stations whose presets leave none of the active release: their stations offer no preset".

Choose which orders a bench takes

Reviewer: under Orders, a bench can take only orders whose reference starts with given prefixes, only orders with given values of one fact from the order source, or both:

  • Reference starts with (separate prefixes with commas): up to 20 prefixes, each up to 40 characters. They are matched exactly, capitals included.
  • And a fact from the order source: one fact the active order source declares, then Is one of up to 20 of its values, from those the source lists where it lists them.

With both, an order must match both. Choose Save orders. Take every order no other bench takes clears the filter.

An order goes to the benches whose filter it matches. An order no filter matches goes to the benches without a filter. A bench without a filter, at a site with several benches, takes "Every order that no other bench's filter takes." So keep at least one bench without a filter, or every order must match one.

If the order source stops declaring a fact a filter reads, that filter matches nothing and its orders go to the benches without a filter. Health warns "Bench order filters reading a fact the order source no longer declares: their orders go to the benches without a filter".

What the station shows

Where the site has more than one bench, the station's status line names its bench, for example "Bench: Samples". An order or preset the bench does not take is refused and nothing is booked:

  • "Order HP-6125 belongs at the Samples bench. Nothing was booked: take it there." The words add "bench" after the bench's name.
  • "Order HP-6125 is not taken by any bench at this site. Nothing was booked: ask a reviewer which bench should take it."
  • A preset the bench does not offer, named by its caption: "Large letter, two finish plates is not used at this bench. Nothing was booked: choose a preset shown here."
  • In Assisted: "The rules recommend a preset that is not used at this bench." No other preset is put in its place.

An armed Automatic station disarms and says when: "Disarmed when an owner moved this station to another bench." or "Disarmed when a reviewer stopped Automatic at this bench."

Refusals

  • "Not done: give the bench a name of up to 64 characters."
  • "Not done: this site already has a bench with that name."
  • "Not done: this site has more than one bench: choose the bench on Site settings and switch it there." This comes from a switch that names no bench, such as the one on the Guided or Assisted rules page, which works only where the site has one bench.
  • "Not done: choose up to 100 presets, each once." and "Not done: choose presets of the active release only."
  • "Not done: give up to 20 different reference prefixes, each up to 40 characters."
  • "Not done: choose a fact the active order source declares." and "Not done: choose up to 20 different values of the fact's kind, from those the order source lists."
  • "Not done: turn Guided off first: a bench uses one decision mode at a time." and the same for Assisted.
  • "Not done: the sample workspace never runs Automatic."