Skip to content
SmartFACT HelpHandbooksWatch and practise
Handbooks: ParcelOffice

How to recommend a preset for one kind of order

Recommends one preset whenever the order source sends the value you choose, such as one product family or one kind of order.

Review edition · 17 November 2026 · For Author

On this page

When one kind of order always goes in the same packaging, a station can recommend it. The starter rule Recommend a preset for one kind of order adds one Assisted rule that recommends the preset you choose whenever the order source sends the value you choose, such as one product family.

Use the starter rule

You need the Author role and an active order source, an active preset release, and an order source that sends a fact with listed values or a yes-or-no fact. The rule is added to the site's Assisted draft: stations keep following the active release until a Reviewer activates a new one.

  1. Open Assisted rules. The Starter rules cards come before the draft.
  2. Find Recommend a preset for one kind of order. It is under Recommend a preset; you can also type a word from its title in the search box, which finds Help articles too.
  3. Fill in the blanks in the card's sentence, "Recommend … when ….":
    • Preset: one of the presets in the active release, by its caption.
    • Kind of order: one value of a fact your order source sends, such as “despatch category is “blinds””. Facts with listed values and yes-or-no facts are offered.
  4. Choose Use this rule. The button waits until every blank has a value.

The rule is added to the draft as its next revision, exactly as if you had typed it into the draft yourself, and the page lists it under the draft. No AI is asked.

Where describing a rule in plain English is available on this site, the card also offers Reword with AI. It adds the same rule, then opens Describe when a rule applies on it with the card's sentence, for you to change and send. It is never offered in the sample workspace.

What the rule does

The rule belongs to the decision which preset an Assisted or Automatic station recommends, or whether it holds the despatch. When an order has the value you chose, an Assisted station recommends the preset, and the operator confirms it to book. The preset must still suit the order's parcels and address: when it does not, the station recommends nothing else. An order another rule recommends a different preset for is a conflict, and is left for a person to choose.

Check the examples

Under Examples prepared for the rule's title, ParcelOffice offers examples made from one of this site's own example orders, with only the facts the rule reads changed: one the rule applies to and, for each part of its condition, one it does not. Each suggests an outcome: “selects” the preset for the order it applies to, and “no rule applies” for the others. Choose Check it in the example form, read the order and the expected outcome, change anything that does not suit your site, then choose Add example. Nothing is added until you do.

Check each suggestion against the draft's other rules, because another rule may also apply to the same order. The preset must also suit the example order's parcels and address, or the outcome is “chosen preset not eligible”. When the site has no example order yet, write the examples in the form yourself: every rule needs one example it applies to and one it does not.

Release it

Choose Verify and create a candidate. Every example is run against the whole draft. A difference names the example: decide whether the rule or the example is wrong before changing either. A Reviewer then activates the proven release with their authenticator from the last hour, and turns Assisted on for the bench on Site settings if it is not on already; see rule review. Automatic uses the same release only once a Reviewer has qualified it.

If the card is refused

The page says what stopped it, and nothing was added:

  • “Not done: that starter rule card has changed, or this site no longer has what it named. Reload and choose it again.” Reload the page and fill in the card again.
  • “Not done: the draft already has that rule, so nothing changed.”
  • “Not done: someone saved a newer draft. Reload, then reapply your change.” Reload, then use the card again.

A card chosen in SmartFACT Automation

Where SmartFACT Automation is connected to ParcelOffice, you can also choose a starter rule there. It opens here on its own card, with its blanks filled in, under the note “You chose Recommend a preset for one kind of order in SmartFACT Automation. Check its blanks, then use the rule here.” Nothing is made until you choose Use this rule on this page. Show all starter rules shows every card again.

If the card has changed since it was chosen, the page says “The card you chose in SmartFACT Automation has changed, or this site no longer has what it named. Choose it again below.”

Changing or removing it later

The rule is an ordinary rule of the draft. To change or remove it, edit or delete it in the draft, retire the examples that expect it, verify the draft and have it activated as usual. Nothing about a starter rule makes its rule permanent, and changing a starter rule later changes no rule already made from it.