Skip to content
SmartFACT HelpHandbooksWatch and practise
Handbooks: ParcelOffice

When the network drops

What the station and office pages show when the connection is lost, what carries on, what is kept, what is sent again and what the Supervisor sees.

Review edition · 17 November 2026 · For Operator, Supervisor

On this page

This page is for when the device you work on loses its connection to ParcelOffice: the station's browser at the bench, or the computer a Supervisor uses. ParcelOffice has no offline mode. It records nothing while the device cannot reach it, keeps nothing on the device, and the device sends nothing again by itself when the connection returns. For the computer that runs the PrintStation app, read a printer stopped printing. For a carrier that did not answer ParcelOffice, read uncertain booking.

What the station shows

When the device itself knows it has no network, the station's status line reads Offline in place of Connected, and under it: "This device is offline. Nothing you scan or press now reaches ParcelOffice: reconnect before you scan or confirm anything." While a booking the station sent is still being booked, it says first: "This device is offline. The booking already sent carries on at ParcelOffice, and its result shows here once the device reconnects." A device joined to a network that cannot reach ParcelOffice can still read Connected, so read the messages below as well.

When something you do gets no answer, the station says so where you did it:

  • A scan, a preset you chose, an Assisted confirmation, arming Automatic or "I understand: one scan buys postage": "No answer from ParcelOffice. Check the connection and scan again." under the scan field or the control you used. The station waits up to 15 seconds for an answer before it says this. ParcelOffice may have received the scan before the connection went, or not: the message cannot tell which.
  • A reference in Or type a reference: the same message, under the button, and the reference stays in the box. Press Use this reference again once the connection is back. The box empties once ParcelOffice answers.
  • Printing and Leave these labels for a supervisor: "No answer from ParcelOffice. Check the connection, then try again."
  • Start working here, End my session and the other buttons that open or send a page: under the button, "The connection was lost. No answer came back from ParcelOffice, so it is not known whether this was saved. Reload this page to check before you try again." Reload this page asks ParcelOffice for the page again and sends nothing you pressed. While the connection is still down it says "The connection is still lost." Once ParcelOffice answers: "The connection is back. This page now shows what ParcelOffice has recorded: check whether what you sent is there before you try again." Where ParcelOffice did receive the press and only its answer was lost, ParcelOffice's own message for it shows at the top of the page as well, for example "You are in the sample workspace. Everything here is synthetic."

A booking that shows "Booking with the carrier…" keeps asking ParcelOffice for its result every second and shows it once the connection returns.

What carries on without the device

ParcelOffice does its own work on its server, whether or not the station is connected:

  • A booking ParcelOffice received is sent to the carrier, and its result recorded, even if the station's connection went straight after the scan.
  • Labels for a station whose printer is set up go from ParcelOffice to PrintStation, and print once the PrintStation app at the bench collects them. PrintStation cancels any label its app has not collected within the delivery window, ten minutes unless your installation sets another, so a label never prints long after the bench moved on. The station then shows "the printer did not take it in time, and nothing was printed" with Send again to the printer.
  • Order source updates about each booking are kept by ParcelOffice. One the order source did not answer, or answered as busy or failing, is sent again from 30 seconds to 30 minutes apart, for 24 hours; any other refusal needs a person at once. After that they wait for an Owner to send them again, unchanged: see version an order source and recover callback delivery. An update that fails never books or prints again.

What is kept, and for how long

  • A work order you scanned stays loaded for five minutes. After that, scan it again.
  • Your station session locks after 15 minutes, unless your installation sets another, with no activity that reached ParcelOffice, even if you were at the screen while the connection was down. The station shows Station locked: "This station locked after 15 minutes without activity. Nothing you saved has been lost." Choose Sign in again: SmartFACT Accounts asks for your own email address and password. If Sign in again itself gets no answer because the connection was lost, the lock says so under the button: choose Sign in again once the connection is back. Whichever way the next sign-in starts on a paired station, by Sign in again, by reloading the page, or by Sign out and then Sign in with SmartFACT Accounts, locked or not, SmartFACT Accounts asks for that person's own email address and password, so the person signed in before cannot be signed back in by mistake. It keeps asking until someone has signed in. The lock does not name a scan or press that got no answer before it: the station keeps nothing on the device, and everything ParcelOffice received is kept on its server. Once you are signed in, open Station, choose Start working here and scan the work order again. If that press reached ParcelOffice, the station shows the booking it made, no preset can book it again, and once it is booked the station says "This despatch already has a booking. Its result is shown below; nothing new was booked."
  • An armed Automatic station disarms within ten seconds of losing contact with ParcelOffice, and says "Disarmed when this page lost contact with ParcelOffice." Arm it again once the connection is back: see Automatic.
  • Labels not yet printed for a booking from the last 12 hours, at a site that prints through PrintStation, hold the station's next order until they are printed or left for a supervisor, whoever signs in: "Print the labels for the last booking first, or leave them for a supervisor, before scanning the next order."
  • What you typed into a form on an office page stays on the page while it is open, also after Reload this page. Reloading the page from the browser, or opening another page, loses it.

When the connection returns

Check what the station shows before you scan anything else:

  • After a work order scan: scan the work order again.
  • After a preset scan, or a work order scan with one-scan booking: scan the work order again. If the earlier scan reached ParcelOffice, the station says "This despatch already has a booking. Its result is shown below; nothing new was booked." and shows that booking. Scanning the preset again is safe too: a despatch has at most one open booking, so nothing is booked twice.
  • After printing: read the labels' state under the booking before pressing anything. Where a label may already have printed, the station says "A label may already have printed. A supervisor checks the bench and reprints from Shipments if needed."
  • If the booking reads booking unknown: stop and give the despatch reference to the Supervisor.

If a press seems to do nothing for a long time with no message at all, reload the page and check what it shows before pressing again.

While the connection is down

Do not book the parcel another way, for example on the carrier's own website, and do not print its label from somewhere else: ParcelOffice would have no record of it, and the despatch could be booked again when the connection returns. Keep each parcel with its work order at the bench, note which ones you had scanned, and tell the Supervisor what happened when the connection is back.

What the Supervisor sees

ParcelOffice does not show anyone that a device has lost its connection. Afterwards, a Supervisor can see:

  • under Shipments, every booking ParcelOffice received, with its state, including any whose outcome is unknown: see uncertain booking;
  • on Stations and printers, a station that nobody has worked at for the quiet period as Quiet, and a printer whose PrintStation app has not been heard from as Attention needed: see why is this station quiet? and a printer stopped printing;
  • on Health, under Needs a person at this site, bookings whose carrier outcome is unknown, shipments where PrintStation does not know whether a label printed or whose labels need a supervisor, and order source updates waiting over an hour.

Labels a station left for a supervisor wait on the shipment's page: see labels and reprints.