# Why is this station quiet?

Read a station's last activity, its holds and the site's quiet period on Stations and printers.

Source: https://help.smartfact.ai/manuals/parceloffice/why-is-this-station-quiet

Review edition: 17 November 2026

Roles: owner, supervisor

Supervisor or Owner opens **Stations and printers** to see which stations are in use. A station reads as **Quiet** when nobody has scanned or worked at it for the site's quiet period. Quiet is not a fault: outside working hours every station is quiet.

## Read the station's line

Each line shows the station's last activity and the roles of the person who worked there, never a name. Activity is a scan or other work on the station page; a station left open on a screen with nobody using it does not count. A station nobody has ever worked at reads as quiet from the start.

**Attention needed** outranks quiet: a quiet station whose printer has stopped, or whose hold has waited too long, shows attention with every reason.

## The station's browser

If the bench should be working, go to it. Check its browser has ParcelOffice's station page open and signed in. A station locks after a spell with no activity and asks the person to sign in again; until someone does, it stays quiet. The station's line reads working again as soon as someone works there. If the station's device lost its connection, see [when the network drops](/manuals/parceloffice/when-the-network-drops).

## Holds waiting at a station

A despatch held by the rules waits for a supervisor. Supervisors see the site's open holds under the list, each with the station that raised it. A station whose hold has waited half an hour needs attention. Except the hold, or put its data right, in **Shipments**; see [decision modes](/manuals/parceloffice/decision-modes). The Owner sees how many despatches are held, not the despatches.

## Owner: set the quiet period

On **Stations and printers**, the Owner chooses how long a station may go without activity before it reads as quiet: 15 or 30 minutes, or 1, 2, 4 or 8 hours. It is one period for the whole site, 30 minutes until the Owner chooses. Choose one longer than the quietest normal gap in a shift.
