This page is about the device you use for the Workstation, Factory handoffs or OrderRun's office pages losing its connection to OrderRun while you work. OrderRun has no offline mode: a scan, a report or a despatch is recorded only when OrderRun answers, and nothing is stored on the device to be sent later. The page keeps only the one action that was waiting for its answer, and only while the page stays open.
What the pages show
What you see depends on what you pressed:
- Find work, a search, a link or a floor filter: under the field or the link: "The connection was lost. No answer came back from OrderRun, and nothing was changed. Try again when the connection is back." Nothing was recorded. Scan or press again once the connection is back; the next page that opens ends the message.
- Acquire station, Resume this station, Release station, Release this station, Record scan, Record this scan again, Save evidence report, Save receiver report, Confirm physical despatch, and every other recorded action: "Waiting for the server to record this action…" while it waits. When no answer comes, at most 15 seconds later, the page shows Check the outcome before continuing: "The answer did not confirm what happened. Stay on this page and check the original request. Its details are kept here, and no action is sent again automatically.", the request reference and Check original request. These never show the connection message as well.
- A document or print: "The answer was not confirmed. Check this same request before doing anything else." with Check saved outcome.
- Check and prepare file on Order intake: The answer was not confirmed, "Check this request to see whether a review was saved. If you retry, the same file and request reference will be used. No upload is sent automatically." Choose Check this request.
- A form on another office page, such as the sample controls or a change on a Site page: "The connection was lost. No answer came back from OrderRun, so it is not known whether this was saved. Reload this page to check before you try again." with Reload this page, which sends nothing again. While the connection is still lost it says "The connection is still lost." Once it is back it says "The connection is back. This page now shows what OrderRun has recorded: check whether what you sent is there before you try again."
- The page catching up after something was recorded. Once OrderRun has recorded an action (after Check original request too), or has saved or checked a document or print, the page reads its records again. If that read gets no answer, the message goes under the button you pressed: "The connection was lost. This was recorded, but no answer came back from OrderRun before this page could show it. Reload this page to see it before you go on." with Reload this page, which only reads. What you pressed is recorded, so do not do it again. An action still shows "The server has recorded the action." under its button. While the connection is still lost the message says "The connection is still lost. This was recorded, but this page does not show it yet. Reload this page once the connection is back." Once it is back it says "The connection is back. This page now shows what OrderRun has recorded." and the page brings it into view.
While Check the outcome before continuing is shown, the page sends no other action, the scan fields are paused, OrderRun's own links do not open, and the browser asks you to confirm before you leave or reload the page.
OrderRun does not say that the device is offline before you press something. A page that is already open stays as it was, and a page opened from the menu shows the browser's own offline page.
What is kept, and for how long
The action that was waiting for its answer, with what you entered, is kept in this page's memory only: OrderRun writes nothing from it into the browser's storage. Reloading the page, closing the tab or leaving the page loses it from the page, and the page then shows what OrderRun recorded. A report filled in but not yet answered is not recorded, and a reload clears it.
Nothing is sent again by itself when the connection returns.
When the connection returns
Choose Check original request. It asks OrderRun about the same action, under its original reference, and never starts a new one:
- "The server has recorded the action.": OrderRun has it, and the page refreshes. If the refresh gets no answer, the page says so under the button and offers Reload this page, as above.
- Not done: with a reason: the action reached OrderRun and was refused. Deal with that reason.
- Retry the same action appears beside Check original request: OrderRun has no record of the action. The retry sends the same action again, with the same reference and the same entry, never a second one.
If OrderRun still cannot be reached, the panel stays. Check again in a moment.
If the page was reloaded before the check
Then this page cannot check that action any more. Read what the page shows before entering anything again. Pressing the same thing again is safe: OrderRun recognises it and answers with what it recorded the first time.
- Record scan: Last scans at your station lists the scans recorded there, with their times. A scan that says what the unit's last scan said, at the same station and the same way, in or out, is not recorded again, however long ago it was: "Not done: this is the same scan as the unit's last one, at this station, so nothing more was recorded. If the unit really came in or went out this way again, choose Record this scan again." Record this scan again appears above that message and records it. Once the unit has been scanned anywhere else, or the other way, the same scan records as usual.
- Save evidence report: a recorded report is listed under Production and prerequisite evidence, marked "awaiting independent review". Saving exactly the same report again, with the same Time observed (UTC), records nothing: "Not done: you have already reported exactly this about this unit, so nothing more was recorded. It is listed under Production and prerequisite evidence. A second observation records once you enter the time it was observed." Once a Supervisor has revoked your report, the same report is recorded again.
- Save receiver report: a recorded report is listed on the pack as "Manually recorded:" with its decision. Saving exactly the same report again, with the same time observed, records nothing: "Not done: you have already saved exactly this receiver report for this pack, so nothing more was recorded. It is listed on the pack as Manually recorded. A later report from the receiver records once you enter the time it was observed." Once the pack has been stopped, for instance by a hold, OrderRun asks for a fresh report, and the same one is recorded.
- Confirm physical despatch: a recorded despatch is listed under Physical despatch with its reference. Despatching the same units again is refused: "Not done: a chosen unit is not issued to the factory for this order, so it cannot be despatched."
- Acquire station or Resume this station: the Workstation says "Station control is active for this sign-in." if it was, or offers the station again if not.
If station control lapses
Station control ends ten minutes after the last action recorded at the station: acquiring or resuming it, a floor scan, a despatch, or an evidence or receiver report saved by an Operator. Finding work, opening pages and reloading do not extend it. After a longer loss, the next action at the station is refused: "Not done: station control lapsed, because nothing was recorded at the station for ten minutes. Sign out and sign in again, then resume the station on the Workstation. Everything already recorded is kept." Reloaded, the Workstation lists the station as "(yours)" and says "Your control of this station lapsed at", with the time, "ten minutes after the last action recorded there. Sign out and sign in again, then resume it here: everything recorded there is kept." Nothing already recorded is lost.
To carry on at the same station:
- Choose Sign out in the menu, then sign in again. In a browser that has held a station, SmartFACT Accounts asks for the email address and password whichever way the next sign-in starts, so the person signed in before is never signed back in by mistake.
- On the Workstation, choose the station under Named station. It says "You hold this station from another sign-in, and its control lapsed at", with the time.
- Choose Resume this station. Resuming needs a second-factor check from the last five minutes: if you signed in longer ago, choose Confirm your second factor first, which brings you back to the Workstation. The Workstation then says "Station control is active for this sign-in." Anything sent from the earlier sign-in is refused, so nothing is recorded twice.
If Check the outcome before continuing is still on the page when control lapses, choose Check original request first: checking an action needs no station control, so it still answers after the lapse. Sign out does nothing until that action is settled. OrderRun keeps the waiting action only on this page, so a new sign-in cannot bring it back: settle it, or note its request reference, before you sign out.
Nobody can take a station from someone else. A station another person holds is listed with their name: "(in use: name)" while they can still use it, and "(lapsed: name)" once their control has lapsed. For a station in use, choose another station or ask them to choose Release station. For a lapsed one, a Supervisor chooses the station, gives a Reason under Release this station and chooses Release this station, with a second-factor check from the last five minutes. The station is then free to acquire, the earlier holder's records are kept, and the release is recorded with its reason. An Operator who chooses a lapsed station is told that a Supervisor can release it.
While the connection is down
Keep the unit, its label and any paperwork together, and note what you observed and when. Evidence and receiver reports ask for Time observed (UTC): when you record them later, enter when the fact was observed, not when you entered it. A floor scan and a despatch carry the time OrderRun received them.
What the Supervisor sees
OrderRun does not show anyone that a device has lost its connection. On the Workstation, the station list shows who holds each station and whether its control has lapsed. A scan, a report or a despatch appears only once it has been recorded. Floor shows where each issued unit was last seen, so a unit whose scan was lost shows where it was scanned before. A report saved again after a reload is answered with the first, so it waits for review once. Two reports of the same unit or pack with different times observed are two observations: review each against what happened. A despatch recorded wrongly is put right with Append a reasoned correction, as in despatch.