Every line of a shop order is picked on the handheld, and what a line must prove before it counts as picked is its permitted proof. A supervisor or reviewer chooses it on Pick checks, for the whole site and, where drawers are labelled bay by bay, for each zone of drawers. Each order keeps what its lines were given when its ticket was made.
The five choices
The choices stand under the names of the three ways a site used to pick: Pick list, Checked picking and Warehouse.
| Choice | The picker | What it proves |
|---|---|---|
| Confirmed by hand (Pick list) | Opens the ticket by scanning or typing its number, picks from the ticket and presses Picked or Fewer for each line, or Picked all for the whole ticket. Nothing else is scanned | Who picked which order, when, and the quantity they confirmed. No scan proves the drawer or the item: the record says "confirmed by hand, no scan proof" |
| Drawer only (Checked picking) | Scans the label on the line's drawer: its StoresFlow label or its printed location code. No item barcode is needed | That the picker was at the right drawer. It does not prove which item went into the envelope: a drawer may hold several items, so the handheld names the item and its quantity beside the drawer, and the shop's product under it |
| Item only (Checked picking) | Scans the item's own code: any barcode or QR code StoresFlow holds for it, or its StoresFlow item label. No drawer scan | Which item was picked, not which drawer it came from |
| Item or drawer (Checked picking) | Either of them | That the line was checked against its own item or its own drawer; the record says which. This is the choice every new site starts with |
| Drawer, then every unit (Warehouse) | The drawer label, then each unit's barcode | The right item and quantity from the right drawer |
A scan the line does not take is refused and says what to do: under Drawer only, the item's own code answers "This line is checked at its drawer. Scan the label on drawer K-21."; under Item only, the drawer label answers "This line is checked by its item. Scan SAMPLE-17438."; on a line confirmed by hand, any drawer or item scan answers "This line is confirmed by hand. Press Picked 3 of 3, or Fewer." and counts nothing. A code StoresFlow holds as both a drawer's code and one of an item's codes is refused under every choice ("That code is both drawer K-21 and item SAMPLE-17438."), so one string never stands for two proofs: scan the drawer's StoresFlow label or the item's own label instead, and ask an author to remove the clash in the next material release.
Confirmed by hand
- Scan the barcode on the pick ticket, or type its number in the same field and choose Use this reference.
- Each line names its item, its quantity and its drawer. Take what it asks for and press Picked 3 of 3, or Fewer than 3 with the quantity you actually took.
- Where several lines wait, Picked all 3 lines confirms them all at once in full. Use Fewer first for any line you could not take in full.
- Press Finish pick, or scan the Finish code where your site finishes there.
The pick is recorded like any other: who picked it, when, at which station, and each line's quantity. Each line confirmed this way says "confirmed by hand, no scan proof". A short line raises a count flag on its drawer when the pick is finished, so someone counts it. A scan made while a line waits for its press is answered there and never presses Picked for you.
How the quantity is confirmed
- A line of one is confirmed by the scan its choice asks for. Nothing to press. Confirmed by hand, you press Picked 1 of 1.
- A drawer label never counts a unit, however often it is scanned or the scanner reads it twice.
- Drawer only, two or more: after the drawer label, take the quantity the line names and press Picked 3 of 3, or Fewer than 3 with the quantity you actually took. A scan counts nothing here; the page answers "A scan counts no units on this line. Press Picked 3 of 3, or Fewer."
- Item only or Item or drawer, two or more: each scan of the item's own code counts one unit, and the scan that reaches the quantity confirms the line. You can also press Picked 3 of 3 once you hold them all.
- Warehouse: after the drawer label, scan each unit's barcode; Cannot scan every unit records an override with a reason from the list.
- An item measured in metres or another fractional unit, under every choice: you confirm the exact quantity with Picked or Fewer. A scan never records how much was cut. A quantity with more decimal places than the item allows, or more than the ticket asks for, is refused.
Nothing picked
Under Drawer only and Item only, a line whose one proof you cannot get, because its drawer has no label any more or the item is not in the drawer, can be recorded as a short pick of nothing: choose Nothing picked, add a note if it helps, and choose Record none. It records that nothing was taken, and finishing the pick raises a count flag on the drawer so someone counts it. Any quantity above nothing needs the line's scan first. Under Item or drawer and Warehouse a scan always comes first. Confirmed by hand, Fewer with 0 records nothing taken.
A line with no location
A line whose item has no home bin is still on the ticket, so it is never missed: its drawer reads "No location" and the ticket says "No location: find by hand". On the handheld the line says "no location: find by hand".
- Where the line would be checked at its drawer (Drawer only or Warehouse), no drawer label can prove it: find the item, then press Picked or Fewer. The record says it was confirmed by hand because it had no location.
- Under Item only or Item or drawer, scan the item's own code as usual.
- Its stock waits until the item has a home bin: the line stays on Channel exceptions until a supervisor gives the item its drawer. Tell a supervisor.
A line not in StoresFlow
SmartFACT Data sends every line of a shop order, even one it cannot match to a StoresFlow item, or whose quantity it cannot work out (a quantity that is not a whole number, for example). Such a line is still on the ticket, so it is never missed: in the shop's own words, its code where the item code goes and its product name, with "Not in StoresFlow" where the drawer goes and the quantity the shop ordered. On the handheld it says "not in StoresFlow: pick by hand".
- Whatever this zone's choice, nothing can prove it: find it, then press Picked or Fewer. The record says it was not in StoresFlow and confirmed by hand.
- It moves no stock: nothing is taken off, held or recorded short for it, and a Fewer raises no count flag. It does not hold up Finish pick.
- Its product is matched in SmartFACT Data, where the line is listed with its reason. Once it is, the next order's line comes as an ordinary line; this order's line stays as it was sent.
Zones
A zone gives a group of drawers a choice of their own. It is a name and the prefixes its drawers' codes start with, such as "Bay K" for codes starting K-, and it may list single drawers too. A drawer belongs to the zone that lists its code, else to the zone with the longest prefix of its code; every other drawer takes the site's own choice. New drawers fall into their bay by their code. Codes are compared exactly, capitals included: correct any code written another way (for example K - 21 beside K-21) in the list it comes from.
Each line takes the choice of its own drawer when its ticket is made, so one order can be checked at the drawer for a line in a labelled bay and confirmed by hand for a line elsewhere. Pick orders says what the order's lines need, for example "by line: Pick list, confirmed by hand; Checked picking, drawer only".
Label one bay at a time
A site whose drawers are not labelled yet picks confirmed by hand and moves to drawer checks bay by bay:
- On Pick checks, change the site's choice to Confirmed by hand, with a reason. Every new ticket's lines are then confirmed by hand.
- Print that bay's drawer labels. Each drawer's StoresFlow label carries a code starting
SFB1:: open Stock, choose an item kept in the drawer, choose Location on its row under Identity document, then Prepare identity label and print it. A drawer's printed location code also proves it, so a bay whose drawers already show their codes clearly can skip this step. - Stick each label on its drawer.
- On Pick checks, add a zone for the bay (for example "Bay K", drawer codes starting
K-) checked by Drawer only, with a reason.
From then on every new ticket's lines from that bay are checked at the drawer; tickets already made keep what their lines were given. Repeat steps 2 to 4 for the next bay.
Which choice is active
- Pick orders says it at the top and for the open order.
- Pick tickets and an order's ticket panel say what each ticket's lines were given, and each line's record says how it was proved: "Checked by drawer K-21 (drawer evidence; the item was not scanned)" under Drawer only, or "confirmed by hand, no scan proof".
- Pick checks shows the site's choice, the zones with how many drawers each holds, and the history. The Owner sees the site's choice on Pick setup.
Change it
Open Pick checks under Site; it is for supervisors and reviewers. Choose one of the five, give a reason and choose Change to .... To add a zone, fill in its name, its drawer-code prefixes (one a line), any single drawers (one code a line) and its choice, give a reason and choose Add the zone; choose Change beside a zone to change or remove it. Recent Accounts verification is required each time. The page first says how many tickets from the last seven days are still open: they keep what they were made with, and tickets made after the change use the new choice.
Item only and Warehouse cannot be chosen, for the site or for a zone, while a stocked item they would cover carries no scannable item code (a barcode, EAN, GTIN, UPC or web address held for it); the page names the items. Add the codes in a material release first. Two zones never share a name, a prefix or a single drawer.
Each change is kept in the history with who made it, when, the reason and the open tickets that kept their choice.
Drawer locations from a file
Drawer locations kept in another list, such as a spreadsheet of products and their drawers, reach StoresFlow only as files a person stages on Reviewed imports: a stores-and-bins file for drawers StoresFlow does not have yet, then a home-bins file giving each item its drawer. The Owner reviews and accepts new drawers; a supervisor reviews and accepts home bins; both need recent Accounts verification. Nothing changes until the file is accepted, and an order never changes a home bin.
The preview names any drawer that will hold more than one item; that is allowed and moves no stock. A drawer the site does not have, one that is retired or is not a bin, a repeated item, or an item the site does not have, refuses the whole file and names the row (in a CSV file the header is row 1), for example "Row 12: item SAMPLE-17438, location K-99.": correct it in the list and stage the file again. See set up stores, bins and opening stock.