Skip to content
SmartFACT HelpHandbooksWatch and practise
Handbooks: ReclaimStation

When the network drops

What each page shows when the connection is lost, what the tab keeps, how to check the original action when it returns, why an action sent again is answered with its first record, and what to do while the connection is down.

Review edition · 12 November 2026 · For Operator, Supervisor, Owner, Author, Reviewer

On this page

This page is about the device losing its connection to ReclaimStation while you work. ReclaimStation has no offline mode: a receipt, a recovery, a check, a move, a reservation or an installation is recorded only when ReclaimStation answers, and nothing is stored on the device to be sent later. What the page does keep is the one action still waiting for its answer, in this browser tab, for you. For an uncertain answer on a working connection, read Resolve station, scan and missing-answer problems.

What the page shows

What you see depends on what happened and what you pressed:

  • The device reports that it is offline, before you press anything: "This device is offline. Reconnect before scanning or confirming work." at the top of the work. Scanning and confirming are held until the device reconnects: their buttons cannot be pressed. A device whose network is up but cannot reach ReclaimStation does not report itself offline, so nothing shows until you press something.
  • A link, or a page from the menu: under the link, or at the top of the page: "The connection was lost. No answer came back from ReclaimStation, and nothing was changed. Try again when the connection is back." Nothing was recorded. Open it again once the connection is back. While this message shows, the offline line above gives way to it, so you see one message, not two.
  • A floor or office action (Use this station, Record physical receipt, the recovery, check, move, hold, reservation and installation actions, permission and release decisions, saving and reviewing templates and policies): "Saving this action. Wait for its result before continuing." while it waits. When no answer comes, at most 15 seconds later, the page shows Check this action before continuing: "The reply was not confirmed. A missing reply does not mean the action failed. Check the original receipt before another attempt.", with the action's Reference and Check original receipt.
  • A form on Team and stations (Save site roles, Remove from this site, Enrol station, Retire station, Save scan setting), under its button: "The connection was lost. No answer came back from ReclaimStation, so it is not known whether this was saved. Reload this page to check before you try again." with Reload this page, which only reads the page again. While the connection is still lost it says "The connection is still lost." Once it is back it says "The connection is back. This page now shows what ReclaimStation has recorded: check whether what you sent is there before you try again."
  • The page catching up after something was recorded. Once ReclaimStation has recorded an action (after Check original receipt too), or answered Upload supporting evidence, Prepare identity label, Prepare recovery report, Send this print job, Check this print request, Validate and preview for an import or Adopt into this draft, the page reads its records again. If that read gets no answer, the message goes under the button you pressed: "The connection was lost. This was recorded, but no answer came back from ReclaimStation before this page could show it. Reload this page to see it before you go on." with Reload this page, which only reads. What you pressed is recorded, so do not do it again. An action still shows "The action is recorded." at the top. While the connection is still lost the message says "The connection is still lost. This was recorded, but this page does not show it yet. Reload this page once the connection is back." Once it is back it says "The connection is back. This page now shows what ReclaimStation has recorded."
  • A print request with no answer: "The print result is unconfirmed. Check the same request before trying again." Use Check this print request, never a new print: see Prepare identity labels, recovery reports and controlled reprints.

While Check this action before continuing is shown, the page sends no other action, ReclaimStation's own links do not open, and the browser asks you to confirm before you leave or reload the page.

What is kept, and for how long

The action waiting for its answer, with what you entered, is kept in this browser tab, for you:

  • Reloading the page keeps it. The page opens with Check this action before continuing and its same Reference, and holds new work until it is checked.
  • Signing in again in this tab as the same person, for the same organisation and site, brings it back to check. Another person signing in to the tab is never offered it, and it waits for the person who pressed it.
  • Closing the tab loses it. Note its Reference first if you cannot check it straight away.

Nothing is sent again by itself when the connection returns.

When the connection returns

Choose Check original receipt. It asks ReclaimStation about the same action, under its original reference, and never starts a new one:

  • "The action is recorded.": ReclaimStation has it. The page reads its records again and shows it. If that read gets no answer, the page says so under the button, as above.
  • This action was not recorded, with a reason: the action reached ReclaimStation and was refused. Deal with that reason before doing anything else.
  • Retry the same action appears beside Check original receipt: ReclaimStation has no record of the action. The retry sends the same action again, under the same reference and with the same entries, never a second one.
  • "This action belongs to an earlier recovery state. Refresh and review the current record.": a restore has happened since. Read the current record before deciding what to do.

If ReclaimStation still cannot be reached, the panel stays. Check again in a moment.

If the same action is pressed again

An action can still be sent twice: from another tab or device, after the tab was closed, or by someone who did not see that it was recorded. ReclaimStation recognises your own action sent again with the same entries, while nothing has been recorded on its records since, and answers with what it first recorded: "This action was already recorded on , so nothing new was recorded." This covers a check, a release, a move, a hold, an identity correction, a concern, the remaining-unit decision, a return category, a permission decision, a replacement label, a destination requirement and a new draft template or policy. Different entries, a different person, or anything recorded on those records in between make a new action, recorded as such.

The other actions are refused when sent again, because the first one changed what they need: the return reference already exists, the position is already recorded, the component is already reserved, the recovery job or installation is no longer open. Read the record the page shows: it holds what was recorded.

If station control lapses

Station control lasts five minutes from the last floor action ReclaimStation accepted at the station. A connection lost for longer comes back to a page without station control: the floor page shows Choose your scan station again, and a floor action is refused until you take control. Nothing already recorded is lost.

If Check this action before continuing is still on the page, choose Check original receipt first. Then choose the same station under Named station and Use this station. If the page says "This station is currently in use by" a name, a Supervisor can tick Take over this station after checking the physical work. before Use this station.

While the connection is down

  • Keep each part with its label, at the place the page last recorded for it. Do not start the next action on a part whose last action is unconfirmed.
  • Do not recover, check, fit or move a part on paper and then key it in later as if it happened at that moment: once the connection is back, check the unconfirmed action first, then record what you physically did next, in order.
  • Do not print a replacement label to get round a print with no answer. A replacement label retires the old one.
  • Tell your Supervisor about any action that stays unconfirmed, with its Reference.