As Operator, check the physical contents of one kit at an enrolled station. You need your own sign-in and a ready kit prepared from an active configuration.
Identify and claim the kit
Open Check kits, choose the correct station and identify the kit by its printed KP1: reference, exact job reference or ready queue. If several kits match the job, choose the physical kit explicitly. A work reference identifies work; it is not a verification result.
Check the displayed kit and requirements before claiming it. Scan components in physical order and wait for the server's accepted result. A waiting or amber scan has not counted yet.
Complete every required capture
Where prompted, record the serial or lot for the named component before scanning another part. The component does not count until the required capture is accepted. If the same part could satisfy several slots, use the offered buttons to choose the intended slot.
A bin card counts only where the frozen policy permits it. KitProof records that as a bin scan, proving the card was scanned rather than the part. Do not present it as a part scan.
Stop at a problem
A rejection, prompt or uncertain answer stops queued scanning. Check the reason, clear unsent scans and rescan only after resolving the cause. Request a permitted exception or ask the Supervisor when a part, quantity or serial disagrees.
Use Complete kit only when the required quantities and decisions are satisfied. Read whether the result is Verified or Completed with exceptions. Follow component scanning, serials and lots and station recovery.