This page is about the device you work on losing its connection to ToolCustody: a handheld or computer at an issue and return station, or a computer in the office. ToolCustody has no offline mode. Nothing is recorded until the device reaches ToolCustody again, and nothing is sent again by itself when the connection returns. Keep the tool and the borrower where you can see them until you know what was recorded. For the original-request check itself, read station problems.
What the pages show
What you see depends on what you pressed:
- A link or a menu entry says under it: "The connection was lost. No answer came back from ToolCustody, and nothing was changed. Try again when the connection is back." Nothing was recorded.
- Choosing a station, Leave this station, the forms on Team and stations, and opening, leaving or resetting the practice site say under the button: "The connection was lost. No answer came back from ToolCustody, so it is not known whether this was saved. Reload this page to check before you try again." with Reload this page. That reload reads the page again and sends nothing you pressed. While the connection is still down it says "The connection is still lost."; once ToolCustody answers, "The connection is back. This page now shows what ToolCustody has recorded: check whether what you sent is there before you try again."
- A tool or badge scan at the station says "The lookup could not be completed. No handover was recorded. Check the connection and look up the code again." On Spot checks a scan says "The lookup could not be completed. Nothing was observed or changed. Check the connection and scan the asset again."
- Check this handover says "The checks could not be completed. No handover was recorded." Where the station chooses the approved task from the job details, it says "The approved task could not be selected from the declared job details. No handover was recorded."
- Record the handover, Record the return, Return to crib, Record the restow, Save borrower and ToolCustody's other recording buttons (positions, opening custody, holds, spot-check observations, service evidence) show "Checking whether this was recorded." when their own answer is lost, with "Keep this page open. Do not repeat the physical handover or start a new request. The original request ID is" and the request's ID, and Check the original request. The recording may or may not have reached ToolCustody.
- Saving or withdrawing a readiness permission shows "Check the original permission request", "The reply is unavailable. Other changes remain blocked.", the request's ID and Check original receipt.
- After a recording ToolCustody made, the page reads its records again. If that gets no answer, the page shows "Recorded." and, under the button you pressed, "The connection was lost. This was recorded, but no answer came back from ToolCustody before this page could show it. Reload this page to see it before you go on." with Reload this page. Do not record it again: it is recorded. Once ToolCustody answers, "The connection is back. This page now shows what ToolCustody has recorded." A readiness permission says "Permission request recorded." and the same.
- Preparing a PDF that gets no answer says "The PDF could not be prepared. No print was requested." Where printing is switched on, a print request whose answer is lost says "The print request is uncertain. Keep the original intent and check it. Do not request another copy."
ToolCustody does not say that the device is offline before you press something. A page that is already open stays as it was.
While an action is unconfirmed
Until the original request is checked, the page keeps it. Its recording buttons cannot be used, ToolCustody's own links and menu do not open, and the browser asks you to confirm before you leave the page. Note the request ID the message shows, and keep the page open. Do not repeat the physical handover, return or restow.
What is kept, and for how long
- An unconfirmed handover, return, restow or other recording, with what you entered, is kept in this browser tab for you, this site and this sign-in. Reloading the tab keeps it, and the page offers Check the original request again. Signing in again, closing the tab or changing to another site loses it from the tab. The text of a reference draft or proof is never kept in the tab.
- A readiness permission request is kept only while the page is open. Its private mappings are never stored in the browser.
- The check made by Check this handover lasts 2 minutes, for your sign-in and the exact tool, borrower, task and times checked. A handover sent after that is refused: "Not recorded: this handover check is no longer current: a check lasts 2 minutes, for this sign-in and the exact details checked. Check this handover again before recording it. Do not repeat a handover that has already happened."
- ToolCustody's own answer to every request it recorded is kept, so Check the original request finds it when the connection returns, however long it was gone.
- The station stays yours for 10 minutes without activity. After that it locks, and a page opened then says "Station locked".
When the connection returns
Choose Check the original request before you reload the page or do anything else. It asks ToolCustody about the same request, under its original ID, and never starts a new one:
- Recorded.: ToolCustody has it. Nothing more is needed. If the page then says the connection was lost, choose Reload this page to see it.
- "The authorised lookup found no receipt for this original request. You may retry recording the same confirmed observation. Do not repeat the physical action." with Retry the original recording: nothing was recorded. The retry sends the same request again, under the same ID, never a second one. It records what you already did: do not move the tool again.
- Not recorded: with a reason: deal with that reason. A handover whose check is more than 2 minutes old is refused in this way. Choose Check this handover again and record it, without handing the tool over a second time.
If ToolCustody still cannot be reached, the page keeps saying "Checking whether this was recorded." Check again in a moment.
If the station locked meanwhile
If the connection was gone for more than 10 minutes, the station has locked. Check the original request still works on the page that shows it, so check first.
If you reloaded the page, it now says "Station locked" and "One action is still unconfirmed: request ID" with the request's ID, then "This tab cannot keep it once you sign in again. Note its request ID now, and check whether it was recorded before doing it again." Note the ID, then choose Sign in again. Signing in again drops the action from the tab.
If Sign in again itself gets no answer because the connection was lost, the lock says so under the button: choose Sign in again once the connection is back. Whichever way the next sign-in starts on a device used as a station, by Sign in again, by reloading the page, or by Sign out and then Sign in with SmartFACT Accounts, locked or not, SmartFACT Accounts asks for that person's own email address and password, so the person signed in before cannot be signed back in by mistake. It keeps asking until someone has signed in.
After signing in, choose the station and look for the action before recording it again: open History and find it by its time, its asset and your name in the Actor column. Record it only if it is not there, and never repeat the physical handover to do so.
What the Supervisor sees
ToolCustody does not show anyone that a device has lost its connection. A handover, return or restow appears in History and in the tool's record only once it has been recorded, with who recorded it and when. One whose recording never reached ToolCustody is not there, and the tool's recorded custody differs from where it is until someone records it. Where an operator reports an unconfirmed action that can no longer be checked, compare the tool with its record and record what is missing, or start a spot check. For a tool whose record and position disagree, read holds and discrepancies.