Skip to content
SmartFACT HelpHandbooksWatch and practise
Handbooks: CheckStation

Receive completed units from WorkSteps

Import the unit file a WorkSteps Supervisor hands over, through the ordinary reviewed import.

Review edition · 16 November 2026 · For Supervisor

On this page

Use this when a WorkSteps Supervisor gives you a file of units whose work there is complete, and your organisation does not use OrderRun to send units here. The file is in CheckStation's own unit file format, so it goes through the ordinary import under Units and context. The two products are not connected: WorkSteps sends nothing here, and CheckStation asks WorkSteps nothing. You need the Supervisor role.

Agree the columns before the first file

Every row carries the same twelve values a native registration asks for. Four are the unit's own in WorkSteps. The source namespace is the WorkSteps source. The source revision is WorkSteps' own revision number for the unit. The order code is the WorkSteps job. The unit code is the WorkSteps unit ID, or the job and the unit ID joined by a slash where unit IDs repeat between jobs.

The WorkSteps Supervisor chooses where the other eight come from: line code, item code, lot code, family, drawing revision, supplier status, customer group and finish. Give them the exact values your approved plan declares for family, drawing revision, supplier status, customer group and finish, because an inspection cannot start on a unit whose context the approved plan does not cover. Ask them to keep the same choices from file to file.

The supplier status in the file is what WorkSteps was told to write. Confirm it against your approved supplier record; neither product checks it for you. Check too that the unit code in the file is what the unit's label carries, because that is what an Operator scans or types to find the unit here.

Import the file

Take the file exactly as WorkSteps wrote it. Its name ends in .json. Do not open and save it in a spreadsheet or editor first: a converted copy can lose leading zeros, and the import takes values exactly as they are.

Open Units and context and find Prepare a context import. Choose the file as Source file and select Validate and preview. The prepared import shows the row count and the first 50 rows. Compare the count, the source namespace and the order codes with what the WorkSteps Supervisor told you to expect, and read the family, drawing revision, supplier status, customer group and finish of the rows shown.

Select Confirm this import only when these are the units you expect. All the rows are registered together or none are. Then find a unit under Registered units by its exact unit code and check its source revision, family and drawing.

A preparation lasts 15 minutes. If it has expired, or a unit changed while you were reading, validate the file again before confirming.

Read what the import means

A registered row is source context that WorkSteps declared and you accepted. It tells you the unit's work was completed there. It records no measurement, starts no inspection and releases nothing. Inspection begins when an Operator confirms the physical unit at a station, as start an inspection describes.

The file carries no reading, photograph, operator or later concern from WorkSteps. Where one matters to your decision, ask the WorkSteps Supervisor for that unit's completion record.

When a file is refused or changes a unit

The import registers nothing from a file it refuses.

WorkSteps checks every value before it writes a file, so a refusal for an empty value, a value over 80 characters or an unsupported supplier status usually means the file was changed on the way. Ask for a fresh download.

A file you have already imported does no harm. Units already held at the same source revision with the same details stay as they are.

If a unit is already held at the same source revision with other details, the whole file is refused. The column choices in WorkSteps changed between two files. Ask the WorkSteps Supervisor to take the file again with the earlier choices. A real change to a unit reaches you as a new source revision.

A new source revision for a unit with an inspection in progress or a current release is accepted and holds that work for your review. Follow the changed-context steps in register exact unit context. The sending steps are in send completed units to CheckStation.