Skip to content
SmartFACT HelpHandbooksWatch and practise
Handbooks: SmartFACT Data

Put a live board on the floor

Publish the starter board Sample picking from a started shop connection in one press, or make a board on Floor boards, and show it on a screen enrolled as a display, so every order is seen moving across the floor.

Review edition · 18 November 2026 · For Owner, Author, Reviewer, Supervisor, Operator, Viewer

On this page

A floor board is a screen that shows orders moving across the floor: each order's reference, its shop and how long it has waited, in columns such as To pick, Picking, Done and Labelled, with the orders that need attention across the top. It shows what has already happened in SmartFACT Data, StoresFlow and ParcelOffice. It has no buttons and never changes anything: the work is still done on the handheld, at the bench and with the printers.

Publish the first board from the shop connection

Once a shop connection has started and the site has no board yet, the connection's page under Shop connections offers the floor board. Press Publish the floor board to make the starter board Sample picking and publish it in one step. You need the Owner role and a second factor from the last hour, which starting the connection usually gave you; if yours is older, SmartFACT Data asks you to confirm it's you and then publishes it.

It is offered rather than done for you, because publishing reaches beyond the people who sign in to this site: SmartFACT Data asks StoresFlow to send the site's ticket and pick events, and the board's display address accepts a screen enrolled in SmartFACT Accounts. Once a board exists, shape it or make more on Floor boards, as below.

Make a board

Open Floor boards from the menu. You need the Owner role.

  1. Under New board, give the board a name if you like, then press From the starter board Sample picking or Blank. The starter has four columns: To pick (Captured, Sent to printer), Picking (Picking, Left for later), Done (Finished) and Labelled (Booked, Label sent, Label printed).
  2. Press Edit to shape it: the place the screen hangs, each column's label and the states it holds, when an order in a column turns amber and red, which shops, products and courier services it shows, what each card shows, and how many minutes a done order stays. A state belongs to one column at most.
  3. Press Save as revision and then Publish revision. Publishing needs a second factor from the last hour: if yours is older, SmartFACT Data asks you to confirm it's you over the page, and once you have entered the code in the SmartFACT Accounts window it publishes the revision without you pressing it again. Every screen showing the board takes the new revision at its next refresh, within a few seconds. Until you publish, screens keep the revision they show.

Retire blanks every screen showing the board. The board and its revisions are kept.

What a board shows

Each order sits in the column of its latest state, by the time that state happened, not the time SmartFACT heard about it. If ParcelOffice books a parcel before StoresFlow's finished pick arrives, the order shows as booked, and the finish is still recorded at its own time.

  • The card always shows the reference, the shop and how long the order has been in its column. It can also show lines picked of lines, where the pick was finished, the courier service and the picking station. It never shows a person's name or initials.
  • Amber and red come from the column's own minutes. An order in the last column is done: it is never late, and it leaves the board after the board's minutes.
  • Needs attention, across the top of every board: Not printed, Output uncertain, Short, Booking unknown, Rejected, Label uncertain, Labels need recovery, and any order that is red. Each stays until something later answers it: a ticket sent again, a booking made, a label sent. Short stays until the order leaves the board.
  • Sent to printer and not scanned for 20 minutes is always red and always across the top, whatever the columns. A board never says a pick ticket was printed: the printer cannot tell anyone that paper came out, so a ticket is only counted once someone scans it to open the pick. Only a label a person confirmed at ParcelOffice says Label printed.

Put the board on a screen

A screen on the floor signs in as a display of one board, not as a person.

  1. Under the published board on Floor boards, follow SmartFACT Accounts to the Displays page, with the board already filled in. An administrator of the organisation enrols the display there and is shown a one-time code. The code works once, for 30 minutes.
  2. On the screen, open the display address shown under the board, in full screen, and enter the code once under Code from SmartFACT Accounts, then press Show this board.

The screen then shows that board only, refreshing every few seconds. If it hears nothing for a minute it says Not updating with the time of its last update. If the display is revoked in Accounts, or the board is retired, the screen goes blank at its next refresh. To replace a lost or stolen screen, revoke its display in Accounts and enrol the new screen.

Under each published board, Screens lists every display with the last time it asked for the board.

What each product shows on floor boards

  • SmartFACT Data: the order captured from the shop, and the order cancelled in the shop.
  • StoresFlow: the pick ticket sent to the printer, not printed or with an uncertain outcome; the pick opened by a scan, each line confirmed (lines picked of lines, and any short line), the pick left for later, and the pick finished, with where it was finished. The station is shown; the picker is not.
  • ParcelOffice: the booking made, unknown or rejected; the label sent to the printer, uncertain, needing recovery or confirmed printed; the booking cancelled.

StoresFlow's events reach the board once a board is published and StoresFlow is connected to this site. ParcelOffice's reach it through the source connection it already uses.

How long timelines are kept

An order's timeline is deleted 7 days after its last state. An Owner can set 1 to 30 days under How long timelines are kept. Boards, their revisions and displays are kept, and are in the complete export; timelines are not.

Health shows how long the oldest board update has waited and how many displays have not asked for their board for 10 minutes.