A display is a screen on the floor that shows one live board of one product at one of your organisation's sites, with nobody signed in. An active, accepted organisation administrator enrols it in Accounts, which shows a one-time code; the screen enters the code once and from then on shows that board and nothing else. A display holds no role, takes no seat and cannot change anything. If a screen is lost, stolen or moved, it is revoked here, in one place, and goes blank.
SmartFACT Data's floor boards are the boards a display can show. The board itself, its columns and what it includes are set up in Data.
Open the page
From Manage employees and access, choose the organisation and open Displays. Accounts asks for your password if you have not just given it, and a two-factor check if you have not given one in the last hour. The link appears while the organisation has a product that shows boards switched on, or already has displays to revoke.
The page lists the organisation's displays, newest first and revoked ones last. Each row gives where the screen is, the board it shows with its product, site and board id, and its state:
- Waiting for its code: enrolled here, and the screen has not entered its code yet.
- Showing its board: the screen entered its code. The row says since when and when the product last checked it.
- Its code ran out before it was entered: the code's 30 minutes passed. Revoke this display and enrol the screen again.
- Revoked: with when and by whom.
Enrol a screen
- In Data, open the board the screen should show and follow its link to enrol a display. Accounts opens with the product, board name and board id filled in. You can also copy them from the board's page.
- Under Enrol a display, check the product and board, choose the Site the screen is at, and give Where the screen is a name the floor recognises, such as Despatch box. Each site in the list says which board products are used there: a display needs its product used at its site (see "Sites: where your organisation works").
- Choose Enrol display. Accounts shows a code of eight letters and digits, in two groups of four.
- On the screen, open the board's address in full screen and enter the code there. Letters may be typed in either case, and the hyphen and spaces do not matter.
The code works once, on that board at that site, for 30 minutes. It is shown once and never again: Accounts keeps only a fingerprint of it. If you lose it or it runs out, revoke the display and enrol the screen again. A code entered on another board, or in another product, is refused and still works on its own board.
Once the code is entered the row reads Showing its board. The screen keeps a token of its own for that board; nobody sees it, and it signs nobody in.
Revoke a display
Choose Revoke on the display's row. It is at once and for good: the screen goes blank at its next refresh, within a minute or two, and a code not yet entered stops working. The row stays, marked Revoked with the time and your name. To put the screen back, enrol it again as a new display.
Revoke a screen that is lost or stolen straight away. Revoke one that is moved, then enrol it where it now hangs, so that its name says where it is.
A display also goes blank while Data is switched off for the organisation, or while the organisation itself is disabled, and shows its board again when both are back. Nothing on the page needs to change for that. Stopping Data at the display's site, or retiring the site, revokes the display.
What a display can and cannot do
| A display | Can | Cannot |
|---|---|---|
| On the floor | Show its one board at its one site, live, for its organisation | Show another board or site, or anything outside the board |
| In Accounts | Be revoked by any organisation administrator | Sign anyone in, hold a role, take a seat or appear among the organisation's people |
| In the product | Be checked by the product at each refresh | Press a button, change a record or act for a person |
Worked example
Sarah, the organisation administrator, wants the sample-picking board on the screen by the despatch box. In Data she opens the Sample picking board and follows its link to Accounts. The form arrives filled in with SmartFACT Data, Sample picking and its board id. She chooses the site the screen is at, names the screen Despatch box and chooses Enrol display. Accounts shows 7K2Q-M9XD.
At the despatch box she opens the board's address in full screen on the computer there and types 7k2q m9xd. The board appears. Back in Accounts, the row reads Showing its board.
A week later the computer is replaced. Sarah revokes Despatch box: the old screen goes blank within a minute or two. She enrols the new computer as Despatch box again, with a new code.
If something is refused
| What happens | What it means | What to do |
|---|---|---|
| Displays is not on the organisation page | No product that shows boards is switched on, and the organisation has no displays | Switch Data on for the organisation, or ask SmartFACT to |
| The page asks you to confirm it is you | Your last two-factor check was more than an hour ago | Enter your authenticator code; the page opens again |
| The page is refused | You are not an active administrator of this organisation | Ask one of its administrators |
| The screen says the code did not work | The code was mistyped, ran out, was entered on another board, or the display was revoked | Check the board on the screen is the one you enrolled; if the code ran out, revoke and enrol again |
| A screen that showed its board is blank | The display was revoked, Data was switched off or stopped at its site, the site was retired, or the organisation was disabled; or the screen cannot reach SmartFACT | Check the row's state here, then the screen's network |
| "is not used at that site" | The product is not used at the site you chose | Put it there on the site's page first, or choose the site where it is used |