Recognise a held tool
Recognise a held tool.
For operators
Practise with these example records. At work, check the tool and the people in front of you before you confirm.
Read these instructions on any device. Watch or practise a chapter on a desktop or laptop, with a desktop or mobile application layout. Demonstrations use sample data and simulated scanners.
Recognise a held tool
- Issue, return and restow
Issue, return and restow.
Open issue, return and restow from the menu.
- Choose your station
Choose your station.
Choose the station you are using. Check that your own name is shown. Ask an owner if the station is missing.
- Scan TOOL-002
Scan TOOL-002.
This example tool came back damaged and is on hold. Scanning it will not remove the hold.
- Choose who is taking the tool
Choose who is taking the tool.
Choose the person receiving the tool. This does not change who is signed in.
- Choose the approved task
Choose the approved task.
Choose the job the tool will be used for. The check will tell you whether it is suitable and its checks stay valid until you finish.
- Read why the held tool is blocked
Read why the held tool is blocked.
Read the reason and leave the tool on hold. Ask a supervisor to review it.
The practice is complete. Check the current tool record before doing this at work.