# Check a recovered part

Record the approved checks for a held part, ready for an independent supervisor review.

Source: https://help.smartfact.ai/reclaimstation/guides/reclaimstation-operator-check-part

Audience: Operator

Work as Sam at the recovery bench. Follow the approved method and record exactly what you observe.

## Check a recovered part

1. **Choose the recovery bench**

   Choose the recovery bench.

   Choose the named bench where you are doing the work.

2. **Use the named station**

   Use the named station.

   Use your own sign-in to take control of the bench. This does not reserve or release any part.

3. **Open Check a part**

   Open Check a part.

   Open Check a part from the menu.

4. **Scan the held module**

   Scan the held module.

   Scan the power module, P M zero five zero three. Check the part and revision against its label.

5. **Choose the approved checks**

   Choose the approved checks.

   Choose the approved method. Its checks and limits come from the approved template.

6. **Record the condition check**

   Record the condition check.

   Look over the casing and connectors, then record what you saw.

7. **Enter the bench reading**

   Enter the bench reading.

   Enter the bench output reading exactly, twenty four point zero six volts. The approved limits are applied when you submit.

8. **Note what you checked**

   Note what you checked.

9. **Confirm these are your observations**

   Confirm these are your observations.

   Confirm that these are your actual observations. A different supervisor reviews them.

10. **Submit the checks for review**

   Submit the checks for review.

   The checks are recorded and the module stays held. A supervisor who did not supply this evidence reviews it and decides on release.

11. **Open the menu**

   Open the menu.

   Open the menu to look at the record.

12. **Show the office pages**

   Show the office pages.

   Switch the menu to the office pages, where the records are.

13. **Open Components**

   Open Components.

14. **Search for the serial**

   Search for the serial.

   Search the complete register for P M zero five zero three.

15. **Run the search**

   Run the search.

   Only the matching module is listed.

16. **Open the module's record**

   Open the module's record.

   Its assessment history shows the checks you submitted, passed against the approved limits. Release is still a separate decision.

[Watch or practise this chapter](https://help.smartfact.ai/reclaimstation/demo?guide=reclaimstation-operator-check-part&chapter=check-part)

Passing checks do not release the part. A supervisor who did not supply the evidence reviews it and decides on release.