Check a recovered part
Record the approved checks for a held part, ready for an independent supervisor review.
For operators
Work as Sam at the recovery bench. Follow the approved method and record exactly what you observe.
Read these instructions on any device. Watch or practise a chapter on a desktop or laptop, with a desktop or mobile application layout. Demonstrations use sample data and simulated scanners.
Check a recovered part
- Choose the recovery bench
Choose the recovery bench.
Choose the named bench where you are doing the work.
- Use the named station
Use the named station.
Use your own sign-in to take control of the bench. This does not reserve or release any part.
- Open Check a part
Open Check a part.
Open Check a part from the menu.
- Scan the held module
Scan the held module.
Scan the power module, P M zero five zero three. Check the part and revision against its label.
- Choose the approved checks
Choose the approved checks.
Choose the approved method. Its checks and limits come from the approved template.
- Record the condition check
Record the condition check.
Look over the casing and connectors, then record what you saw.
- Enter the bench reading
Enter the bench reading.
Enter the bench output reading exactly, twenty four point zero six volts. The approved limits are applied when you submit.
- Note what you checked
Note what you checked.
- Confirm these are your observations
Confirm these are your observations.
Confirm that these are your actual observations. A different supervisor reviews them.
- Submit the checks for review
Submit the checks for review.
The checks are recorded and the module stays held. A supervisor who did not supply this evidence reviews it and decides on release.
- Open the menu
Open the menu.
Open the menu to look at the record.
- Show the office pages
Show the office pages.
Switch the menu to the office pages, where the records are.
- Open Components
Open Components.
- Search for the serial
Search for the serial.
Search the complete register for P M zero five zero three.
- Run the search
Run the search.
Only the matching module is listed.
- Open the module's record
Open the module's record.
Its assessment history shows the checks you submitted, passed against the approved limits. Release is still a separate decision.
Passing checks do not release the part. A supervisor who did not supply the evidence reviews it and decides on release.