# Check, use and remove the same part

Keep manual checks, permission, the usable bin, the fitted destination and a later return together.

Source: https://help.smartfact.ai/reclaimbench/guides/check-use-and-remove

Audience: Operator

Keep manual checks, permission, the usable bin, the fitted destination and a later return together.

## Check and fit the part

1. **Scan the recovered driver**

   Scan the recovered driver.

   Scan the full local label and check the record before choosing any action.

2. **Inspect the identified part**

   Inspect the identified part.

   Check this exact part against the requirements you use for the job.

3. **Record a passed check**

   Record a passed check.

4. **Describe the check and observation**

   Describe the check and observation.

5. **Confirm you checked this part**

   Confirm you checked this part.

6. **Review the check record**

   Review the check record.

7. **Keep the check with the part**

   Keep the check with the part.

8. **Choose the usable bin**

   Choose the usable bin.

   A passed check is not enough on its own. Check permission, identity and the actual bin.

9. **Select the actual usable bin**

   Select the actual usable bin.

10. **Record the availability decision**

   Record the availability decision.

11. **Confirm checks and permission**

   Confirm checks and permission.

12. **Review the move and availability**

   Review the move and availability.

   The review records both the real movement and the decision to make this part available locally.

13. **Make the part available locally**

   Make the part available locally.

14. **Record a completed fitting**

   Record a completed fitting.

   Only record use after this exact part has actually been fitted in the chosen unit.

15. **Choose the fitted unit**

   Choose the fitted unit.

16. **Record the fitting observation**

   Record the fitting observation.

17. **Confirm the actual fitting**

   Confirm the actual fitting.

18. **Review the fitting record**

   Review the fitting record.

19. **Keep the fitting history**

   Keep the fitting history.

20. **Confirm the fitted part cannot be used twice**

   Confirm the fitted part cannot be used twice.

   Scanning the label again shows the existing fitting. You cannot record another use while this part is already fitted.

[Watch or practise this chapter](https://help.smartfact.ai/reclaimbench/demo?guide=check-use-and-remove&chapter=check-and-use)

## Remove the same part during a later return

1. **Record an actual removal**

   Record an actual removal.

   When the part really comes out of its fitted unit, record removal. Do not correct a fitting that actually happened.

2. **Choose where the removed part is held**

   Choose where the removed part is held.

3. **Link the actual later return**

   Link the actual later return.

4. **Record why the part was removed**

   Record why the part was removed.

5. **Confirm the part has been removed**

   Confirm the part has been removed.

6. **Review the removal and return**

   Review the removal and return.

7. **Return the same part to hold**

   Return the same part to hold.

   The component keeps its identity, but needs a fresh check before another use.

[Watch or practise this chapter](https://help.smartfact.ai/reclaimbench/demo?guide=check-use-and-remove&chapter=remove-again)