# Send completed units to CheckStation

Take the units whose work is complete as a file that a CheckStation Supervisor imports.

Source: https://help.smartfact.ai/manuals/worksteps/send-completed-units-to-checkstation

Review edition: 13 November 2026

Roles: supervisor

Use this when your organisation inspects finished units in CheckStation and does not use OrderRun to send them there. WorkSteps writes the units whose work is complete to a file, you download it, and a CheckStation Supervisor imports it. WorkSteps sends nothing to CheckStation and the two are not connected: the file is the whole handover. You need the Supervisor role, and recent Accounts authentication to download.

## Know what the file says

The file has one row for each unit whose work is complete. A unit counts when its most recent attempt is completed and that completion falls in the period you choose. If rework or a replacement traveller was issued after a completion, the unit is left out until that work completes.

A row identifies the unit and describes what kind of unit it is. It carries no reading, photograph, operator, result or later concern. In CheckStation it becomes unit context that a Supervisor there previews and accepts. It does not start, pass or release an inspection, and it is not evidence that the procedure was followed. Use the completion JSON or PDF for that, as [history and exports](/manuals/worksteps/history-and-exports) describes.

WorkSteps writes the source, the source revision and the job as they are; CheckStation calls the job the order code. CheckStation also needs a line code, item code, lot code, family, drawing revision, supplier status, customer group and finish. WorkSteps does not hold these under the same names, so you say where each comes from. Agree the meaning of each column with the CheckStation Supervisor before the first file: the approved inspection plan chooses its checks from the family, drawing revision, supplier status, customer group and finish.

## Request the file

Open History and find Completed units for CheckStation. Set Completed from and To; the days are UTC days and the period is at most 366 days. Enter a Job to take one job only. It must match exactly.

Then place the columns.

| Field or control | What to enter | Checks and limits | If it is refused |
| --- | --- | --- | --- |
| unit_code, From | The unit ID when every unit ID is used once across all jobs, such as a serial number. The job and the unit ID, joined by a slash, when unit IDs such as 00001 repeat from job to job. | The resulting code is what the inspector scans or types in CheckStation, so it must match the label on the unit. | If a unit ID is used in more than one job, the request is refused until you choose the job and the unit ID. |
| Each other column, From | A unit field (the job, the unit ID, the family, the customer code or the drawing revision), An option of the unit, or Fixed text. Lot code can also be No lot. | One source for each column. A whole number is written in digits and a yes or no option as true or false. | Choose a source that every unit in the period has. |
| Option name | The option's exact name from your unit import, without the option. prefix. | Lower case letters, digits and underscores, starting with a letter, at most 64 characters. | Check the name in the import file's header. |
| Fixed text | The value every row in this file should carry. For supplier status, choose approved or newly_approved. | At most 80 characters, not empty, no tabs or line breaks. Choose the supplier status your approved supplier record supports; WorkSteps does not know it. | Shorten the agreed value or agree a different one. |

Select Request unit file. The file is listed under the form as Units for CheckStation. Reload the page if it still shows Being prepared, then select Download and complete Accounts authentication if asked. The download is available for 24 hours and each download is recorded.

The form starts from the choices of the site's previous request. Keep them unless the agreed meaning has changed. CheckStation refuses a unit it already holds at the same source revision with other details, so a column placed differently in a later file stops that file there.

## When the request is refused

Nothing is written unless every unit in the period can be written exactly. WorkSteps never shortens a value, leaves a unit out or fills a gap for you.

If no unit completed its work in the period, check the dates and the job. If more than 2,000 units completed, choose a shorter period or one job and take several files.

If some units cannot be written, the message names the job, unit, column and problem for up to twenty of them and gives the count. A unit with no value has no such option, or no customer code: choose another source or a fixed text for that column, or take those units as a separate file by job. A value over 80 characters, an empty value or a control character is something CheckStation would refuse. A completed unit's values are fixed with its traveller, so place the column on another source, or leave that unit to be registered in CheckStation by hand under an agreed code.

## Hand the file over

Pass the file to the CheckStation Supervisor by your organisation's approved route for production records, with the period and job it covers. Do not open and save it in a spreadsheet or editor on the way: the import takes the file as WorkSteps wrote it, and a converted copy can lose leading zeros. The receiving steps are in [receive completed units from WorkSteps](/manuals/checkstation/receive-units-from-worksteps).

Taking the same units again with the same choices gives the same rows, and CheckStation treats a row it already holds as nothing new. A unit that completes again after rework appears in a later file with the source revision that work used. If that revision is new to CheckStation and the unit already has an inspection in progress or a release there, CheckStation holds it for its Supervisor to review.

A downloaded file is a record of that moment. Keep its generation time with it, and request a new file for a later period; an earlier download is never updated.
