# How to send a family without a current qualification to a review area

Use a starter rule to send returns of a tool family whose qualification is not current to a review area.

Source: https://help.smartfact.ai/manuals/toolcustody/how-to-send-a-family-without-a-current-qualification-to-a-review-area

Review edition: 13 November 2026

Roles: author, reviewer

A gauge whose calibration has lapsed must be checked before anyone uses it again. The starter rule **Send a family without a current qualification to a review area** sends returns of a tool family whose calibration or maintenance is not current to the review area you choose.

## Use the starter rule

You need the Author role, and the site needs a saved reference draft or an active release. The rule goes into the reference draft's next revision. Nothing changes at the stations until a reviewer activates a proved revision that contains it.

1. Open **References and policies**.
2. Under **Starter rules**, find **Send a family without a current qualification to a review area**. It is in **Where returns go**. You can also type a word from its title in **Search starter rules and Help**.
3. Fill in the blanks in the card's sentence, "Send returns of … tools whose qualification is not current to ….":
   - **Tool family**: one of the families in the references, shown by its name and code.
   - **Review area**: one of the site's active review areas, shown by its name and code.
4. Choose **Use this rule**. The button waits until every blank has a value.

ToolCustody saves the next draft revision: of the latest reference draft while it is still a draft, otherwise a new draft from the latest saved references. The rule is added after the rules its stage already has, with a priority ten above the highest of them. It is the same rule you would get by writing it in Advanced JSON and choosing **Save a new draft revision**. No AI is asked. The page says "Recorded." and that a newer saved revision is available: choose **Load the current saved revision**, and the page then says which starter rule the current revision began from.

Save or discard any editor changes first: the cards wait while the editor has unsaved changes.

Where SmartFACT Automation is connected to ToolCustody, you can also arrive here from **New requirement** there, which offers the same cards. Its **Use this rule** makes nothing: it opens References and policies with this card alone and its blanks filled in. Check the blanks, then choose **Use this rule** on the page. **See every starter rule** shows all the cards.

Where plain English is switched on for your installation, the card also offers **Reword with AI**. It adds the same rule, then opens **Prepare a condition in plain English** on it with the card's sentence in **When should this rule apply?**. It sends nothing: you change the sentence and choose **Prepare a condition** yourself. Plain English is never offered in the practice site.

## What the rule does

A return of a tool in that family whose qualification is not current must be recorded at your review area, and the tool is held until a supervisor reviews it and clears the hold. A return of the same family with a current qualification, and returns of other families, are decided by the other return rules or go to the default review area. The rule never accepts or extends a qualification: service evidence is reviewed separately.

"Send returns of Finishing fixtures (FIXTURE) tools whose qualification is not current to Returns review shelf (REVIEW-A)" sends a finishing fixture whose calibration has lapsed to the returns review shelf.

Rules of a stage are tried in priority order, lowest first, and the first that applies decides. The new rule comes after the stage's other rules, so an earlier rule that also applies still decides. If it must come first, give it a lower priority in Advanced JSON.

## Prove it

A starter rule saves no example, because the expected outcome is your approved business answer: ToolCustody never works it out for you. The proof needs an example for every rule, so it fails until you add one for the new rule. Under **Check examples and approve the release**:

- Add Advanced JSON examples for the return stage, such as `{"stage": "return", "facts": {"family_code": "FIXTURE", "qualification_current": false}, "expected_outcome": {"review_position_code": "REVIEW-A"}}`, and one with a current qualification expecting the area the other rules or the default give.
- Keep one task example that gets the default task.

Choose **Run the proof** and read its results. A reviewer then checks the references, examples and proof, enters the activation reason and chooses **Activate this unchanged proved revision** after recent Accounts authentication. [References and approval](/manuals/toolcustody/references-and-approval) describes the review. A rule from a starter rule is reviewed like any other.

## Change it later

Nothing about a starter rule makes its rule permanent. Change its condition, outcome or priority in Advanced JSON, or remove it, and save a new draft revision. Prove and activate it in the same way. Loans and returns already recorded keep the decisions they were made with.

## If the card is refused

A refused card saves nothing, and the page says why:

- "Not recorded: the reference draft changed after this page was read." Someone saved the draft after you opened the page. Load the current saved revision, check what changed, then use the card again.
- "Not recorded: this card has changed or no longer fits the references." A task, family or review area the card named has gone, or ToolCustody's starter rule changed. Reload the page and fill the card in again.
- "Not recorded: the references already have this rule in the same stage, so the card would change nothing." A rule of that stage already has exactly this condition.
