# Pick a shop order on the handheld

Scan or type the ticket, then each line: confirmed by hand with Picked or Picked all, or under Checked picking by a scan, a longer line counting each scan of the item's own code; lines with no location or not in StoresFlow; Fewer, Warehouse, and finishing by Finish pick or a Finish card.

Source: https://help.smartfact.ai/manuals/storesflow/pick-shop-orders

Review edition: 18 November 2026

Roles: supervisor, operator

Every shop order is picked on a handheld at a working station: the pick ticket, then each line, then **Finish pick**. Every scan and press is recorded against you and the station. What each line must prove (a scan of its drawer or its item, or nothing: confirmed by hand) is shown at the top of the page and on each line; see [what each pick line proves](/manuals/storesflow/what-a-pick-proves).

## Open the order

Open **Pick orders** and choose this working station if asked. Scan the barcode on the pick ticket, or type its number and choose **Use this reference**. The page shows the order, the shop, and each line with its item, quantity and drawer. Work through the lines in order; the page says which line is next.

Under each line's item is the shop's own product, as the order named it: its code, its name and how many the customer ordered, for example "Shop: MAIN-191338, Sunset Ash Blackout, 1 ordered". The pick ticket shows the same under the item. One drawer's item can stand for several of the shop's products, so read this line to see which one the order is for: two lines from the same drawer are two products.

To stop part-way, choose **Leave for later**, or scan a **Leave for later** card where your site has one. You, or another picker, carry on by scanning the ticket again.

If the scanner's beep comes but nothing appears, the scan still reaches the page's scan field: with the cursor on the page or on a button, a scan goes to the field and never presses the button. With the cursor in another box, such as the **Fewer** quantity, what the scanner types stays in that box.

## Each line, confirmed by hand

Where a line is confirmed by hand (Pick list), it asks for no scan: "Pick from the ticket, then press Picked 3 of 3, or Fewer". Take what it names and press **Picked 3 of 3**, or **Fewer than 3**. Where several lines wait, **Picked all 3 lines** confirms them all at once in full. A scan on such a line is answered there and counts nothing. Each line's record says "confirmed by hand, no scan proof".

A line that says "no location: find by hand" has no drawer: its item has no home bin yet. Find it, take what it names and press **Picked** or **Fewer**; under Item only or Item or drawer scan its item as usual. Tell a supervisor, so the item gets its drawer.

A line that says "not in StoresFlow: pick by hand" is one SmartFACT Data could not match to a StoresFlow item, or whose quantity it could not work out. It shows the shop's own code and product name and the quantity the shop ordered. Find it, take that quantity and press **Picked** or **Fewer**; where it says "the quantity on the shop order", check the order and press **Picked**. A scan on such a line is answered there and counts nothing. It moves no stock in StoresFlow, and its record says it was not in StoresFlow and confirmed by hand. Tell a supervisor, so the shop's product is matched in SmartFACT Data.

## Each line, under Checked picking

What a line must prove is shown at the top of the page and on the line, for example "Checked picking, drawer only". This section describes **Item or drawer**. Under **Drawer only** scan only the drawer's label: no scan counts a unit, so a line of two or more is confirmed by **Picked 3 of 3** or **Fewer**, and **Nothing picked** records a line where nothing could be taken. Under **Item only** scan only the item's own code. See [what each pick line proves](/manuals/storesflow/what-a-pick-proves).

Scan the item's own code (any barcode or QR code StoresFlow holds for it, including the address of its page on the shop) or the label on its drawer. What happens next depends on the line:

- **A line of one.** That scan confirms it: one picked, nothing to press. The page says, for example, "Line 1: 1 each picked from drawer A-01."
- **A line of two or more, counted in whole units.** Each scan of the item's own code counts one unit: the field says "Scan SCREW-001 for each unit (2 of 3 scanned)". The scan that brings the count to the quantity confirms the line. Scan each unit once, as you take it.
- **The drawer label on such a line** proves you are at the drawer, but counts no units, however often it is scanned. After a drawer label, either scan each unit's code or press **Picked 3 of 3** once you hold them all.
- **An item measured in metres or another fractional unit.** Its scan proves the line; press the **Picked** button, which names the whole quantity, to confirm it.

A scan after the line is complete is refused with "This line is complete. Go on to the next line." Another item's code is refused with both items named, and counts nothing.

## Fewer than the ticket says

Choose **Fewer than 3**, enter the quantity you actually picked and, if it helps, a note, then **Record 2 picked**. A short pick is always this deliberate press; no scan ever records one. When the pick is finished, StoresFlow raises a count flag on the drawer so someone counts it.

## Each line, under Warehouse

Scan the label on the drawer first, then the barcode on each unit: the count shows "2 of 3 scanned" and the line completes when it reaches the quantity. If a unit cannot be scanned, choose **Cannot scan every unit**, a reason from the list and the quantity picked.

## Finish

Once every line is picked or short, the page shows "Scan the Finish code, or press Finish pick" and **Finish pick**. Scan the **Finish pick** card where your site has fixed one, such as beside the despatch box, or choose **Finish pick**. Either finishes the pick the same way, and the finished order says where it was finished: "Completed 16 Nov 2026, 09:05, finished at Despatch box." What finishing does to the stock record depends on the site's choice on **Pick setup**: see [when shop orders take stock](/manuals/storesflow/when-stock-comes-off). A line confirmed by its scans and a line confirmed by a press are recorded the same way and move the same stock.

A Finish card scanned too early is refused with the lines still to pick, for example "Not finished: line 1 still needs picking." A card scanned with no order open says "Open a pick first: scan its ticket." A card that was replaced or retired, or one from another site or the sample workspace, is refused by name and does nothing; ask a supervisor for the current card. Supervisors manage the cards: see [action codes](/manuals/storesflow/action-codes).

A line that says "Stock not tracked" is picked and checked like any other, but its stock is not tracked: finishing takes nothing off StoresFlow's stock for it, whatever the site's choice, and a short pick of it raises no count flag. See [sales channels](/manuals/storesflow/sales-channels).

Where your organisation has a wiring in ParcelOffice on finished picks, a line under **Finish pick** says what the press will start there, such as booking the order's shipping label: see [StoresFlow's events to other products](/manuals/storesflow/events-to-other-products). **Finish pick** works the same whatever the line says.

Where the Owner has asked for every pick to be finished at a Finish code, **Finish pick** for an operator answers "Scan the Finish code at Despatch box", naming the places of the site's cards: walk the order to one of them and scan it. A supervisor may still finish by pressing **Finish pick** and giving a reason. **Leave for later** always works.

## After SmartFACT was restored from a backup

A pick finished after the backup was taken is not in the restored stock record. Where the shop's journal holds evidence about the order and a supervisor has given StoresFlow that evidence, scanning the order's ticket says so instead of opening the pick:

- **The shop journal records order ... picked before the restore**, with where and when: do not pick it again. Its stock was taken when it was first picked, and is not taken again.
- **The shop journal has uncertain recovery evidence for this order. Ask a supervisor before picking.** The journal leaves the order for a person, for example because one of its entries is missing. Put the ticket aside and ask a supervisor.

A pick that was already open for such an order cannot be finished either: **Finish pick** answers with the same reason, and nothing is recorded. Once a supervisor has found out what happened and released the order on **Shop journal recovery**, its ticket opens and its pick finishes as usual.

A pick the journal shows finished reads on its ticket as "Picked at Despatch box ..., as the shop journal records", with the supervisor who recorded it after the restore: the journal names the place, never the picker.

## What is recorded

For each line: who checked it and when, the value scanned, and whether the item's own code or the drawer label proved it; under Drawer only the record says it holds drawer evidence, not the item. For each scan and press: its outcome, who, which station and when, and for the step that confirmed a line under Checked picking, whether a scan or a press confirmed it. For the finish: whether the press or a card finished it and, for a card, its place. Supervisors and viewers see the pick on **Pick tickets** and on the order's history.

If an answer is lost, check the same step again: it is never recorded twice, and a unit scanned twice under one lost answer counts once. Scanning the same Finish card again after a lost answer checks that same finish again; it never finishes the order twice. See [when the network drops](/manuals/storesflow/when-the-network-drops).
