# Action codes: cards that press Finish pick

Add, print, replace and retire the cards a picker scans instead of pressing Finish pick or Leave for later, and the Owner's Finish only at a Finish code.

Source: https://help.smartfact.ai/manuals/storesflow/action-codes

Review edition: 18 November 2026

Roles: supervisor, owner, operator

An action code is a printed card that does what pressing one button on the handheld pick does. Fix a **Finish pick** card beside the despatch box and a picker scans it instead of pressing **Finish pick**: the pick they have open finishes, as them, with the same checks as the press. A **Leave for later** card does what **Leave for later** does. A code chooses no order, names no person and gives nobody a role: scanned with no pick open, it does nothing and says so. Supervisors add, print, replace and retire codes; the Owner may ask for every pick to be finished at a Finish code.

## Add a code

Open **Action codes** under Site. Choose the button the code presses (**Finish pick** or **Leave for later**) and name the place where its card will be fixed, in up to 60 characters, such as "Despatch box". You may add a short note of your own, up to 60 characters, such as "Print shipping label when done"; the card prints it smaller, as a note. Choose **Add this code**.

Two active codes for the same button cannot share a place. A site can have up to 100 active codes. Action codes work only at your real site: the sample workspace shows a specimen card instead, and StoresFlow refuses that card wherever it is scanned.

## Print the card

Under the code's card on the page, choose **4 x 6 inch label** or **A4 sheet**. When the PDF is ready, choose **Send this PDF to PrintStation** or **Download the prepared PDF**. The card shows the button's words in large type, the place, a barcode (Code 128) and a QR code of the same value, the value itself in small type, "Scanning this does the same as pressing **Finish pick**." and your note.

On the 4 x 6 inch label the barcode usually runs along the card's long edge, because the code is too wide to print across a 4 inch label at a size scanners read reliably. Scan it with the scanner turned to match, or scan the QR code. On A4 the barcode runs across the page.

Fix the card where its place says. Only supervisors print cards.

## Replace a lost or damaged card

Choose **Replace card**, give a reason and choose **Replace the card**. StoresFlow keeps the code and gives it a new generation; every card of the old generation is then refused with "This card was replaced by a newer one". Print the new card at once. Recent Accounts verification is required.

## Retire a code

Choose **Retire code**, give a reason and choose **Retire the code**. Every card of that code is then refused as retired, and its place is free for a new code. Recent Accounts verification is required. Retired codes stay listed under **Retired** with who retired them, when and why.

## Finish only at a Finish code

The Owner can ask for every pick to be finished at a Finish code, on **Pick setup**, with a reason and recent Accounts verification. It can be turned on only while the site has an active Finish code. While it is on:

- An operator's **Finish pick** press is refused with "Scan the Finish code at Despatch box", naming the places of the site's Finish codes.
- A supervisor may still press **Finish pick**, with a reason, so a lost or unreadable card never leaves a pick unfinished.
- **Leave for later** always works, by press or by card.

A photocopied card works anywhere, so the setting guides where picks are finished; it does not prove it.

## What is recorded

Each code keeps its history: who added, replaced or retired it, when, its generation and the reason. Every scan of a code on the handheld is recorded, accepted or refused, with the code, its place, the open pick, the person, the station, whether it came from a key, the button or the camera, and whether it looked scanned or typed. A finished pick records whether it was finished by the press or by a code and, for a code, its place; the pick's own panel says "finished at Despatch box".
