# Let a finished pick in StoresFlow book its label

Write a wiring, run it on trial, set its cap and make it live, so a pick finished in StoresFlow books its despatch at a station here.

Source: https://help.smartfact.ai/manuals/parceloffice/wirings

Review edition: 17 November 2026

Roles: owner, author, reviewer, supervisor

A wiring is a rule your organisation approves by which a finished pick in StoresFlow books its despatch here: when StoresFlow says a pick is finished, if the wiring's condition holds, ParcelOffice books the despatch on the preset the wiring names, at the station it names, as the person who finished the pick, and the label prints on that station's printer. It is written and released like any rule, it starts inactive and on trial, and it books nothing until a Reviewer makes it live once its checklist is met.

## Before you start

- An Owner connects the site to your StoresFlow site on **Site settings**, under **Connections**, with the StoresFlow site's 26-character ID and their authenticator from the last hour. An Owner also connects ParcelOffice on StoresFlow's own Site page, under Connections. Without both, StoresFlow sends nothing.
- The station the wiring books at needs a checked printer (**Stations and printers**), because nobody stands at a panel to print from.
- **Wirings** appears in the menu for Owners, Authors, Reviewers and Supervisors once the site is connected.

## Write a wiring

An Author presses **Start a wiring** on **Wirings**, gives it a name, then either writes its JSON document or fills in the starter card **Book finished picks when no lines are short**: the StoresFlow sales channel ID, the station, the preset and a daily ceiling (bookings and value). **Use this wiring** writes the document; ParcelOffice keeps the IDs and revisions itself. The starter writes no example: the page offers three prepared ones (every line picked, one line short, another channel) for the Author to check and add.

**Save draft** lists anything that stops it being verified, such as a preset that is not offered at the station's bench or a station with no checked printer. **Verify and create a candidate** freezes it with its proof: every example passes, at least one books and one does not, and each part of the condition has an example that fails that part alone.

## Release it, inactive

A Reviewer releases a candidate whose proof passed, with their authenticator from the last hour. If they verified it themselves, they say why they are releasing it themselves; the checklist shows that reason. The wiring is then **Inactive: on trial**.

## The trial

On trial, each finished pick is decided by the wiring's condition, checked, and looked up through your order source, and the page records what it would have done: **Would have booked**, **Would have refused** or **Would have held**, with why. Nothing is booked, printed or reserved, and no courier is asked. When the bench later books the despatch, the trial shows whether it agreed.

A Reviewer or Supervisor records a disposition for every run that disagreed, would have refused or would have held (a pause or Wired bookings off needs none). The trial needs three operating days and 20 picks, or a Reviewer's written waiver for a low-volume flow, and at least one pick it would have booked. A Reviewer then presses **Mark the report read**.

## Limits and the Owner's approval

ParcelOffice holds no courier prices. Under **Limits**, an Owner sets the daily cap (bookings and value, at or below the ceiling the wiring was released with) and an indicative price per booking, which counts each booking against the value, then presses **Approve this revision's spending**. Each needs their authenticator from the last hour. A new revision needs a new approval; a changed cap does not.

## Make it live

**Before it goes live** lists the checklist. Each item says what is missing and where it is fixed:

0. ParcelOffice can reach StoresFlow (your deployer's set-up);
1. both products are enabled for your organisation;
2. an Owner connected the two products, here and in StoresFlow;
3. every trial run's order reference was found ready by the order source;
4. everyone who can finish a pick holds the ParcelOffice operator role (granted in SmartFACT Accounts);
5. the booking's own set-up is ready: the station's printer checked and its agent heard from, the preset offered at its bench and fitting it, its courier account able to book;
6. the station's bench has **Wired bookings** on (a Reviewer switches it on **Site settings**);
7. the cap is set and the spending approved;
8. every example passes;
9. a Reviewer released it;
10. the trial ran;
11. wirings that spend are not paused.

A Reviewer presses **Make live** with their authenticator from the last hour. While any item is unmet it cannot be pressed, and ParcelOffice checks every item again when it is.

## While it is live

A run that books reads, on the shipment's page, "Booked by the wiring … (revision …) when … finished the pick for … in StoresFlow at …". A picker who has never signed in to ParcelOffice is "a StoresFlow picker". **Shipments** marks it **Wired**.

A run is **refused** (the order waits at the bench, where a scan books it), **held** for a Supervisor, or **unknown** when the courier's answer was lost. It is held when the pick finished more than 15 minutes before it could be booked, wirings are paused, the bench has Wired bookings off, today's cap is reached, SmartFACT Accounts did not answer, or the wiring is suspended. A Supervisor releases a held run with their authenticator from the last hour, which checks it again and books it as the picker, or cancels it with a reason. A run held because it may already have been booked before a restore is released only with the Supervisor's written confirmation that no label exists.

## Pause, suspension and retirement

- **Pause wirings that spend** is on **Wirings**. An Owner, Reviewer or Supervisor pauses; only an Owner resumes, with their authenticator from the last hour. Runs are held while paused and never lost; resuming releases none of them.
- A live wiring is **suspended** when StoresFlow is disconnected, its station moves to another bench or is retired, a new preset release changes its preset, or either product is no longer enabled. A Reviewer resumes it on the same checklist.
- A Reviewer retires a wiring that is no longer wanted. It decides and books nothing more.
