# A printer stopped printing

Read a bench printer's state on Stations and printers and check the workstation, the printer and the PrintStation app.

Source: https://help.smartfact.ai/manuals/parceloffice/a-printer-stopped-printing

Review edition: 17 November 2026

Roles: owner, supervisor

Supervisor or Owner opens **Stations and printers** to see whether a bench printer is alive. Each station shows the PrintStation destination it prints to, as PrintStation lists it at that moment, with **Working**, **Quiet** or **Attention needed**, the reason, and what to check next. Reading the page changes nothing and tells nobody anything: people decide what to do.

## Read the printer's line

Find the station's line. Lines that need attention come first. The line names the destination and the printer behind it, when PrintStation last heard from its app, the app's version, copies waiting, the last copy sent and any recent failures with PrintStation's own reason.

**Last copy sent** is the moment the PrintStation app accepted a copy for that printer. It is not proof that paper came out. The last copy sent and the recent failures count every product's copies on that printer; copies waiting counts ParcelOffice's own.

The page reads PrintStation once, when it opens. Choose **Read again** after you have checked something. A reading older than a minute and a half is never shown as working.

## Power and network at the workstation

When the line says PrintStation has not heard from its app within its online period, go to the workstation that runs the PrintStation app at that bench. Check it is switched on, awake and connected to the network. A workstation that went to sleep or lost its network stops the app's heartbeat.

## The printer's own display

Look at the printer itself: its power, its labels or ribbon, and any error on its own display. A printer that is not ready, or a copy PrintStation could not send, is usually settled here. Clear the fault on the printer, then **Read again**.

## The PrintStation app

On that workstation, check the PrintStation app is open, signed in and not paused. A paused app holds copies in its queue. Its version is shown on the line; the [PrintStation manual](/manuals/printstation) covers the app itself.

## When the reason is in PrintStation or ParcelOffice

Some reasons have nothing to check at the bench. A destination PrintStation no longer lists, one that is disabled, and a copy whose outcome PrintStation holds for checking are settled in PrintStation by whoever runs it. When PrintStation could not be asked at all, the page says so and shows only the destination's name.

A failure stands until a copy is accepted after it. Do not book again because a label has not printed: follow [printing](/manuals/parceloffice/printing) and, for a booked shipment's label, [labels and reprints](/manuals/parceloffice/labels-and-reprints).
