Evaluate, accept and prepare an engineering pack
Create a checked result for one unit, then generate its private fixed evaluation pack.
For supervisors
This lesson uses a fictional frame and a person with only the supervisor role. No result here is approved for real manufacture.
Read these instructions on any device. Watch or practise a chapter on a desktop or laptop, with a desktop or mobile application layout. Demonstrations use sample data and simulated scanners.
Evaluate, accept and prepare an engineering pack
- Configurations
Configurations.
Open configurations.
- Choose the training frame
Choose the training frame.
Use an already approved and active release. Each configuration describes exactly one unit.
- Enter the frame width
Enter the frame width.
Enter an exact width of 800 millimetres. Check the selected unit alongside the value.
- Enter the frame height
Enter the frame height.
Enter an exact height of 1000 millimetres.
- Choose the finish
Choose the finish.
Choose the approved natural finish from the declared options.
- Choose whether a panel is required
Choose whether a panel is required.
Choose no panel for this frame. Do not infer a missing option.
- Evaluate the configuration
Evaluate the configuration.
Apply the active reviewed rules, then inspect the parts, quantities and cut dimensions.
- Accept the exact checked result
Accept the exact checked result.
Accept only the valid result you checked. Acceptance records this engineering evaluation, not order approval or permission to manufacture.
- Generate an evaluation pack
Generate an evaluation pack.
Generate a private fixed PDF and JSON record marked for evaluation. Downloading it does not prove delivery or printing.
Check the current record and your own authority before working with real data. An evaluation result never authorises manufacture.