Amend an accepted configuration
Copy accepted inputs into a new revision, re-evaluate and accept the replacement deliberately.
For supervisors
This lesson uses a fictional frame and a person with only the supervisor role. No result here is approved for real manufacture.
Read these instructions on any device. Watch or practise a chapter on a desktop or laptop, with a desktop or mobile application layout. Demonstrations use sample data and simulated scanners.
Amend an accepted configuration
- Configurations
Configurations.
Open configurations.
- Choose the training frame
Choose the training frame.
Use an already approved and active release. Each configuration describes exactly one unit.
- Enter the frame width
Enter the frame width.
Enter an exact width of 800 millimetres. Check the selected unit alongside the value.
- Enter the frame height
Enter the frame height.
Enter an exact height of 1000 millimetres.
- Choose the finish
Choose the finish.
Choose the approved natural finish from the declared options.
- Choose whether a panel is required
Choose whether a panel is required.
Choose no panel for this frame. Do not infer a missing option.
- Evaluate the configuration
Evaluate the configuration.
Apply the active reviewed rules, then inspect the parts, quantities and cut dimensions.
- Accept the exact checked result
Accept the exact checked result.
Accept only the valid result you checked. Acceptance records this engineering evaluation, not order approval or permission to manufacture.
- Start an amendment
Start an amendment.
Start another input revision of this configuration. The earlier accepted result remains unchanged.
- Choose the current release for the amendment
Choose the current release for the amendment.
Check the original and currently active release before choosing the rules for the new evaluation.
- Correct the width
Correct the width.
Change the width to 900 millimetres. The old result is not edited.
- Evaluate the configuration
Evaluate the configuration.
Apply the active reviewed rules, then inspect the parts, quantities and cut dimensions.
- Accept the exact checked result
Accept the exact checked result.
Accept only the valid result you checked. Acceptance records this engineering evaluation, not order approval or permission to manufacture.
Check the current record and your own authority before working with real data. An evaluation result never authorises manufacture.