Enter the independently expected assessment template

Enter the independently expected assessment template

1. Load the supplied assessment template

   Load the supplied assessment template

   Load the exact saved MOTOR-CHECK revision 3 method for the MOTOR-7 revision B part in model MODEL-7 revision B. Its engineering values come from the approved method.

2. Enter template name

   Enter template name

   Enter MOTOR-7 B assessment from the independently checked method requirement.

3. Enter model code

   Enter model code

   Enter MODEL-7 from the independently checked method requirement.

4. Enter model revision

   Enter model revision

   Enter B from the independently checked method requirement.

5. Enter approved method reference

   Enter approved method reference

   Enter MOTOR-CHECK from the independently checked method requirement.

6. Enter approved method revision

   Enter approved method revision

   Enter 3 from the independently checked method requirement.

7. Start the component positions

   Start the component positions

   Open an empty list for the positions supplied by the approved method.

8. Add the required component position

   Add the required component position

   Add the MOTOR position specified by the approved method.

9. Enter the position code

   Enter the position code

   Enter MOTOR exactly as supplied for the required motor position.

10. Enter the part code

    Enter the part code

    Enter MOTOR-7 exactly as supplied for the required motor position.

11. Enter the part revision

    Enter the part revision

    Enter B exactly as supplied for the required motor position.

12. Start the supplied checks

    Start the supplied checks

    Open an empty list for the checks supplied by MOTOR-CHECK revision 3.

13. Add the supplied function check

    Add the supplied function check

    Add the function check named in MOTOR-CHECK revision 3. Do not invent another check or measurement limit.

14. Enter the check code

    Enter the check code

    Enter FUNCTION from the supplied method.

15. Enter the check name

    Enter the check name

    Enter Approved function check from the supplied method.

16. Choose pass or fail

    Choose pass or fail

    The supplied method requires a pass/fail result, with no measured decimal limit.

17. Record no unit

    Record no unit

    Explicitly record no unit for this pass/fail check. A blank value is not the same as a declared absence.

18. Record no minimum

    Record no minimum

    Explicitly record no minimum for this pass/fail check. A blank value is not the same as a declared absence.

19. Record no maximum

    Record no maximum

    Explicitly record no maximum for this pass/fail check. A blank value is not the same as a declared absence.

20. Enter zero decimal places

    Enter zero decimal places

    Enter the supplied scale of zero for this pass/fail check.

21. Require recorded evidence

    Require recorded evidence

    Select Yes because the approved method requires evidence for the function check.

22. Enter the approved 24-hour validity

    Enter the approved 24-hour validity

    Enter 24 hours exactly as supplied. No expiry would require an explicit approved method value, never an omitted or blank duration.

23. Prepare the complete expected template

    Prepare the complete expected template

    Prepare the complete independent template values for this exact source revision.

24. Upload the complete independent values

    Upload the complete independent values

    Upload the complete expected configuration privately. It is not yet saved or reviewed.

25. Confirm the independent configuration

    Confirm the independent configuration

    Confirm that every expected field came from the approved method and requirement.

26. Save the independently expected template

    Save the independently expected template

    Save every expected value together. A different person must review this complete declaration.

Watch or practise this chapter