# Edit PrintStation configuration in the form

As a PrintStation Owner, prepare a transport policy on desktop using approved sources, media and printers. A prepared route does not prove physical printing.

Source: https://help.smartfact.ai/automation/guides/printstation-manual-edit

Audience: Author

As a PrintStation Owner, prepare a transport policy on desktop using approved sources, media and printers. A prepared route does not prove physical printing.

## Edit PrintStation configuration in the form

1. **Load the current PrintStation configuration**

   Read the current product configuration before changing it.

2. **Choose the configuration task**

   Choose the source-owned form for the change you need.

3. **Read the editing controls**

   Read the current conditions and permitted values.

4. **Choose the complete change**

   Keep the condition and complete action together.

5. **Choose the source fact**

   Route this rule using the product that submitted the request.

6. **Match the source exactly**

   Require the submitted product name to match exactly.

7. **Enter the permitted product**

   Only RefillFlow requests match this rule.

8. **Choose the approved media**

   Choose the existing label size and resolution.

9. **Start the registered sources**

   Add an explicitly approved choice to this list.

10. **Add the registered sources**

   Add one existing source choice.

11. **Choose the registered sources**

   Choose the existing approved entry by its displayed name.

12. **Start the connector builds**

   Add an explicitly approved choice to this list.

13. **Add the connector builds**

   Add one existing source choice.

14. **Choose the connector builds**

   Choose the existing approved entry by its displayed name.

15. **Start the approved printer order**

   Add an explicitly approved choice to this list.

16. **Add the approved printer order**

   Add one existing source choice.

17. **Choose the approved printer order**

   Choose the existing approved entry by its displayed name.

18. **Set the heartbeat age**

   Require the connector heartbeat to be no older than 90 seconds.

19. **Set the first rule priority**

   Set the first rule priority to 10.

20. **Prepare the complete change**

   Check the complete values before preparing the private file.

21. **Upload the checked file**

   Upload the complete change. Uploading alone does not save it.

22. **Confirm the complete change**

   Confirm that the whole file contains the values you intend to save.

23. **Save the complete change**

   Wait for the product to confirm the original save. Separate checking and approval are still required.

[Watch or practise this chapter](https://help.smartfact.ai/automation/demo?guide=printstation-manual-edit&chapter=complete-change&audience=office)

The saved change still needs independent expected answers, checking and the product’s required review before use.