# Review the expected results for the panel constraint

Check the independently worked FA-300 cases, including the black frame with a clear panel, for the expert-approved model that now holds the panel constraint, before approving them.

Source: https://help.smartfact.ai/automation/guides/factoryspec-assisted-case-review

Audience: Reviewer

Check the independently worked FA-300 cases, including the black frame with a clear panel, for the expert-approved model that now holds the panel constraint, before approving them.

## Independent expected results

1. **Load the FA-300 family**

   Load the FA-300 family

   Load the FA-300 family from FactorySpec. A separate engineering expert has approved the model with the panel constraint.

2. **Open the expert-approved release**

   Open the expert-approved release

   Open the release the engineering expert approved in FactorySpec. It holds the panel constraint saved from the plain-English proposal.

3. **Read the expected results**

   Read the expected results

   Read each case and its expected result. The black frame with a clear panel, 800 by 1,000 mm, is expected to be blocked; the ordinary natural frame expects two members at 760.0 mm, two at 960.0 mm, four corner blocks and eight screws.

4. **Explain the independent result check**

   Explain the independent result check

   Record how you checked the panel constraint, the frame dimensions and the bills of materials against the drawing.

5. **Approve the expected results**

   Approve the expected results

   Save your independent check of these expected results. This does not select or activate the release.

[Watch or practise this chapter](https://help.smartfact.ai/automation/demo?guide=factoryspec-assisted-case-review&chapter=assisted-rule&audience=office)

The expected results are approved. Selecting the release still needs the proof and an independent release review.